HOW to USE the Schwinn Exercise Bike, Seat adjustment

Nautilus OM 113/213 08/18/2004 12:00 AM Page 8

OPERATION

HOW TO USE THE SCHWINN EXERCISE BIKE

■ Seat adjustment

Fig. 1

Proper seat adjustment helps ensure maximum exercise efficiency and comfort, while reducing the risk of injury.

1.Place one pedal in the forward position and center the ball of your foot over the center of the pedal. Your leg should be slightly bent at Fig 2. the knee (Figs. 1 and 2).

Fig. 2

2.If your leg is too straight or your foot cannot touch the pedal, you will need to move the seat down on the upright bike or forward on the recumbent bike. If your leg is bent too much, you will need to move the seat up on the upright bike or backward on the recumbent bike.

Fig. 3

3.Adjust the upright seat height by first dismounting the bike, then pulling out the adjustment knob on the seat tube and releasing the locking pin (Fig. 3). Lower or raise the seat to the desired height. Release the seat knob, engaging the locking pin. Be sure that the pin is fully secured in a seat post hole. To adjust the recumbent seat, pull the seat knob up to release the seat. Slide the seat forward or backward to the desired position. The knob will “pop” up into the next hole; turn the knob to ensure a tight fit. (Fig.4)

Fig. 4

4.The upright bike also features a combination fore / aft and micro seat height adjustment slider. To move the seat closer to, or away from the console, loosen the knob, slide the seat forward or rearward to the desired position and re-tighten (Fig. 5). Because of the unique angled design of the slider it also functions as a micro seat height adjustment. Using this feature in combination with the pop-pin adjustment on the seat tube enables you to fine tune the proper seat height for optimum comfort and performance.