Schwinn 202 manual Seat Adjustment

Page 15

Step 15: Attach UPPER COMPUTER CABLE (#28) and HR CABLE (#29) to under side of COMPUTER (#34). Place COMPUTER (#34) on top of CONSOLE MAST (#30), the reading rack should wrap around the bottom of the COMPUTER. Attach COMPUTER to CONSOLE MAST with COMPUTER MOUNTING SCREWS (#33). (In computer back) Tighten with Phillips head screwdriver.

Step 16: Plug power adapter into the wall and into the recumbent bike. The power input on the bike is located at the front end of the MAIN UNIT (#31) just above the FRONT STBILIZER TUBE (#17)

Seat Adjustment

For best results, the seat should be adjusted for your height.

1.Unlock “seat locking” mechanism.

2.Adjust seat location so that with feet on the pedals, you can comfortably reach pedal at full extension.

That’s it!

You’re finished and now you can begin to reach your fitness goals!

Please reference the Owner’s Manual for information regarding computer operation, product maintenance, warranty information, and general fitness and exercise guidelines.

Image 15
Contents Schwinn Recumbent Exercise Bike Important Precautions Page Quantity Description Parts ListStage#1 Stage#2 Hardware ChartAssembly Drawing with Reference Numbers Replacement Parts List Assembly Stage #1 InstructionsAssemble Seat and Handle Bar Page Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly Stage #2Attach Front Stabilizer Tube and Pedals to Main Unit Assembly Stage #3Attach Seat Rail and Lower Base Frame to Main Unit Assembly Stage #4Page Attach Console Mast to Main Unit Assembly Stage #5Seat Adjustment Problem Computer will not start, function, or is blank… Troubleshooting the Schwinn 202 Recumbent Exercise Bike