Schwinn 202 manual

Page 3

202 Schwinn Recumbent Bike Parts List, Hardware Chart, and Assembly Instructions

Assembly of the 202 Recumbent Bike is divided into 5 easy stages; each comprised of only a few setup steps. Before proceeding with the assembly, please read over the easy to follow instructions to familiarize yourself with the process.

A flat area of 5’ x 7’ is suggested to assemble the 202 exercise bike.

You will need the following tools to complete the assembly:

5mm Allen wrench (supplied)

Open wrench 13mm, 14mm, 15mm (supplied)

Phillips screwdriver (supplied)

Also, to ensure quick and easy set up of the 202 Recumbent Bike, please verify the size and quantity of each of the enclosed assembly hardware. Included is a handy full size hardware chart and parts list of each of the required assembly hardware. Simply match up the corresponding hardware to each full size drawing.

Image 3
Contents Schwinn Recumbent Exercise Bike Important Precautions Page Quantity Description Parts ListStage#1 Stage#2 Hardware ChartAssembly Drawing with Reference Numbers Replacement Parts List Assembly Stage #1 InstructionsAssemble Seat and Handle Bar Page Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly Stage #2Attach Front Stabilizer Tube and Pedals to Main Unit Assembly Stage #3Attach Seat Rail and Lower Base Frame to Main Unit Assembly Stage #4Page Attach Console Mast to Main Unit Assembly Stage #5Seat Adjustment Problem Computer will not start, function, or is blank… Troubleshooting the Schwinn 202 Recumbent Exercise Bike