Schwinn 202 manual

Page 9

Step 3: Attach SEAT BACK (#5) to SEAT FRAME (#8) with 4 ALLEN BOLTS (#1) and 4 WASHERS (#2). Tighten Bolts.

Note: Finished seat should look like picture below:

Image 9

Contents Schwinn Recumbent Exercise Bike Important Precautions Page Quantity Description Parts ListStage#1 Stage#2 Hardware ChartAssembly Drawing with Reference Numbers Replacement Parts List Assembly Stage #1 InstructionsAssemble Seat and Handle Bar Page Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly Stage #2Attach Front Stabilizer Tube and Pedals to Main Unit Assembly Stage #3Attach Seat Rail and Lower Base Frame to Main Unit Assembly Stage #4Page Attach Console Mast to Main Unit Assembly Stage #5Seat Adjustment Problem Computer will not start, function, or is blank… Troubleshooting the Schwinn 202 Recumbent Exercise Bike