Burley AQ 6688 manual Installing the Tow Bar for the Nomad, Installing the Tow Bar for the Flatbed

Installing the Tow Bar for the Nomad™

Tip the trailer onto its back end. Slide the tow bar onto the pivot pin at the left front. Remove the hairpin cotter and lock pin from the front tow bar receptacle, rotate the tow bar up into place, and snap it into the two plastic tow bar receptacles. Push the lock pin fully into the front tow bar receptacle. Rotate the lock pin and locate the hole in it, between the receptacle and the trailer frame. Anchor the lock pin by inserting the hairpin cotter all the way into the hole in the lock pin.

1. Slide Tow Bar onto Pivot Pin

4. Anchor Lock
Pin with	2. Rotate Tow Bar
Hairpin Cotter	into Place

3. Anchor Lock Pin with Hairpin Cotter

5. Lock Pin and Hairpin

Cotter Locked in Place

(viewed from underside)

WARNING

Never operate the Nomad™ trailer without tow bar lock pin and hairpin cotter locked in place. An unlocked tow bar can loosen or detach and cause an accident, resulting in serious injury.

Installing the Tow Bar for the Flatbed™

Rotate the tow bar up into the plastic tow bar receptacle at the front frame. To lock the tow bar in place, slip the retaining pin through the hole in the tow bar receptacle and close the pin (see illustration).

WARNING

The retaining pin must be locked in place before using the Flatbed™ trailer; otherwise, the tow bar could shift and cause an accident and serious injury.

B U R L E Y T R A I L E R O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N UA L