Leupold Rx-750, Rx-600 operation manual Continuous Measurement of a Moving Target / Scan Mode

Page 9

CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:

1.Follow the instructions for “Measuring distance…” as explained previously..

2.Once the target has been measured, continue to hold down the POWER button and follow the object as it moves..

3.The distance will automatically update as long as the POWER button is continuously depressed..

4.This procedure can also be used to obtain the range of multiple animals or objects; simply move the reticle from one target to another while holding down the POWER button..

CLEARING THE LAST DISTANCE OBTAINED:

The last range reading does not need to be cleared before reading another object’s distance.. For that reason, there is no reset button.. Simply aim at the new object using the reticle, depress the POWER button and hold until the new range reading is displayed..

6

Image 9

Contents RX-600 and RX-750 Series Rangefinders Leupold & Stevens Table of Contents Introduction HOW the RX-600 / RX-750 Works Safety and Operation Precautions RX-600/750 Features at a Glance Measuring Distance with the RX-600 Battery Power Status IndicatorContinuous Measurement of a Moving Target / Scan Mode Maximum Range Specifications Quick Set Menu OperationQuick Start Menu RX-750 model only Function 1 Rifle Mode RFLRFL RFL TBR True Ballistic Range Rifle TBR True Ballistic Range BOW Yards lineof sightat a 40 declineFunction 2 Seven Rifle Ballistics Groups TBR Performance Groups Cartridge table Winchester Super Short Magnum ABC Yards Bullet Path Less than -96 inches of path height Bow Group Data Function 3 BOW ModeBOW Function 4 Unit Output Function 5 Last Target Mode Function 6 Line of sight Output Plus Point Function 7 3 selectable reticlesFirst, into the battery compartment.. Close battery cover Cleaning/MaintenanceFor RX-750 model, follow the Quick Set Menu procedure see Rangefinder does not provide range By postal service Leupold Product Service P..O.. Box Warranty/Repair