Leupold Rx-750, Rx-600 operation manual Function 6 Line of sight Output

Page 29

26

Function 6: Line of sight Output

This mode, when activated, provides the straight line distance to the target in the bottom portion of the display. To activate LOS, navigate through the Quick Set Menu by pressing the MODE button until the LOS icon is shown in the lower right portion of the display. Press and release the POWER button to turn LOS on/off. If you deactivate both the rifle mode and bow mode, LOS mode will automatically be activated.

NOTE: On the RX-600 model, LOS is shown in the upper portion of the display at all times.

Image 29

Contents RX-600 and RX-750 Series Rangefinders Leupold & Stevens Table of Contents Introduction HOW the RX-600 / RX-750 Works Safety and Operation Precautions RX-600/750 Features at a Glance Measuring Distance with the RX-600 Battery Power Status IndicatorContinuous Measurement of a Moving Target / Scan Mode Maximum Range Specifications Quick Set Menu OperationQuick Start Menu RX-750 model only Function 1 Rifle Mode RFLRFL RFL TBR True Ballistic Range Rifle TBR True Ballistic Range BOW Yards lineof sightat a 40 declineFunction 2 Seven Rifle Ballistics Groups TBR Performance Groups Cartridge table Winchester Super Short Magnum ABC Yards Bullet Path Less than -96 inches of path height Bow Group Data Function 3 BOW ModeBOW Function 4 Unit Output Function 5 Last Target Mode Function 6 Line of sight Output Plus Point Function 7 3 selectable reticlesFirst, into the battery compartment.. Close battery cover Cleaning/MaintenanceFor RX-750 model, follow the Quick Set Menu procedure see Rangefinder does not provide range By postal service Leupold Product Service P..O.. Box Warranty/Repair