Leupold Rx-750, Rx-600 operation manual Function 4 Unit Output

Page 27

Function 4: UNIT OUTPUT

This mode is used to choose between yards and meters as the preferred unit of measure. TBR measurements are shown in the top portion of the display, line of sight measurements shown in the bottom portion of the display (RX-750 Model Only).

To choose between yards and meters, navigate through the Quick Set Menu by pressing the MODE button until “Unit” is shown in the upper

display. Press and release the POWER

button to alternate between yards and meters.

Image 27

Contents RX-600 and RX-750 Series Rangefinders Leupold & Stevens Table of Contents Introduction HOW the RX-600 / RX-750 Works Safety and Operation Precautions RX-600/750 Features at a Glance Measuring Distance with the RX-600 Battery Power Status IndicatorContinuous Measurement of a Moving Target / Scan Mode Maximum Range Specifications Quick Set Menu OperationQuick Start Menu RX-750 model only Function 1 Rifle Mode RFLRFL RFL TBR True Ballistic Range Rifle TBR True Ballistic Range BOW Yards lineof sightat a 40 declineFunction 2 Seven Rifle Ballistics Groups TBR Performance Groups Cartridge table Winchester Super Short Magnum ABC Yards Bullet Path Less than -96 inches of path height Bow Group Data Function 3 BOW ModeBOW Function 4 Unit Output Function 5 Last Target Mode Function 6 Line of sight Output Plus Point Function 7 3 selectable reticlesFirst, into the battery compartment.. Close battery cover Cleaning/MaintenanceFor RX-750 model, follow the Quick Set Menu procedure see Rangefinder does not provide range By postal service Leupold Product Service P..O.. Box Warranty/Repair