Leupold Rx-600, Rx-750 operation manual Function 7 3 selectable reticles, Plus Point

Page 30

27

Function 7: 3 selectable reticles

This mode allows you to choose any one of the 3 preloaded reticles as the primary aiming point for the RX-600 / 750 digital laser rangefinders.. To select a reticle, press Mode repeatedly until the current reticle is blinking.. Press POWER repeatedly to scroll through the available reticles, then press MODE when the preferred reticle is shown.. The reticle choices are as follows:

Plus Point

Plus PointTM: Ideal for varmints and other small targets. Small open center avoids coverage of very small or distant targets.

Duplex®

Duplex®

with Plus Point

without Plus Point

Duplex®: Familiar reticle to shooters from riflescopes; draws eye to the center, easy to see, does not cover the target in the center where aiming is most critical.

Image 30
Contents RX-600 and RX-750 Series Rangefinders Leupold & Stevens Table of Contents Introduction HOW the RX-600 / RX-750 Works Safety and Operation Precautions RX-600/750 Features at a Glance Battery Power Status Indicator Measuring Distance with the RX-600Continuous Measurement of a Moving Target / Scan Mode Maximum Range Specifications Operation Quick Set MenuQuick Start Menu Function 1 Rifle Mode RFL RX-750 model onlyRFL RFL TBR True Ballistic Range Rifle Yards lineof sightat a 40 decline TBR True Ballistic Range BOWFunction 2 Seven Rifle Ballistics Groups TBR Performance Groups Cartridge table Winchester Super Short Magnum ABC Yards Bullet Path Less than -96 inches of path height Function 3 BOW Mode Bow Group DataBOW Function 4 Unit Output Function 5 Last Target Mode Function 6 Line of sight Output Function 7 3 selectable reticles Plus PointCleaning/Maintenance First, into the battery compartment.. Close battery coverFor RX-750 model, follow the Quick Set Menu procedure see Rangefinder does not provide range Warranty/Repair By postal service Leupold Product Service P..O.. Box