Bushnell 3.5-21X50, 4.5-30X50 manual Bushnell G2DMR Reticle

Page 20

Bushnell G2DMRReticle

The G2DMR reticle, developed in conjunction with G.A. Precision, provides a clean reticle space while giving you the ability to range targets with extreme accuracy using .1 Mil reference points. The extended horizontal mil markings on the lower portion of the vertical crosshair can be used for both ranging and windage holds. The entire reticle is shown below, but the following pages will provide a detailed look at the markings on the horizontal and vertical crosshairs.

20

Image 20
Contents Proud USA Company Page Table of Contents Power Change Ring Windage Turret Sunshade Parts GuideSide Focus Power Change RingFast Focus Eyepiece Elevation and Windage Turrets StepSpecial Note Scopes Equipped with the Z-Lok elevation turret Setting a Zero Stop Z-StopModels Only Setting a Zero Stop Z-Stop Models Only Resetting the Zero Stop Z-Stop Models Only Page First Focal Plane Reticle Bore Sighting and Zeroing the Scope Bushnell Mil Dot Reticle Mils at Yards Using the Mil Dot Reticle for Ranging EquationsConverting Trajectory Data to Mil Holdovers Federal .308 168-gr Bthp Holdovers for a Mil-Dot Reticle Distance Trajectory Mil Size Actual HoldoverUsing the Mil Dot Reticle for Holdover Yards Mil valueBushnell G2DMR Reticle Horizontal Crosshair Mil consisting Ten .1 mil marks VerticAL Crosshair Horus Vision H59 Reticle Calculating Holds for ElevationCalculating Holds for Moving Targets Horus Vision TRMR2 Reticle Page Calculating for Movers 3mphReticle from 10TH MIL to 38TH MIL Down on Vertical Stadia Horizontal StadiaMaintenance StorageElite Lifetime Limited Warranty Bushnell Outdoor Products Cody, Overland Park, Kansas 800