Bushnell 3.5-21X50, 4.5-30X50 manual Horus Vision TRMR2 Reticle

center) for elevation, use a hold point in line with the appropriate speed. To hold on a target traveling at a speed between markings (such as 5 mph) you hold between the even numbers on either side of it (4 and 6 mph).

For more detailed information regarding this reticle and its use, please visit www.horusvision.com or call 650-588-8862

Horus Vision TRMR2 Reticle

The TRMR2 is a refined-mil reticle. Precision mil-marking clusters interspersed throughout the reticle enable fast accurate measurements at .1, .2, .5 and 1 mil increments. With the 12” ranging brackets located on the lower portion of the vertical stadia, there is no need to make an additional adjustment once the correct bracket is found. The TRMR2 is a fast acting, precise reticle designed to engage targets quickly and accurately.

CALCULATING HOLDS FOR ELEVATION

The TRMR2 12” bracket system (Drop Finder) on the lower vertical stadia, incorporates the Accuracy First Speed Shooting Formula to help you rapidly determine an elevation hold for your target without using the traditional Mil relation formula for range finding. The steps for determining an expedient hold are as follows:

26