Newcon Optik NC 3-12X50 operation manual Battery Installation

Page 21

The riflescope NC 3-12х50 can be supplied with fixation mounts for exact weapon model or without them depending on the particular order.

6. BATTERY INSTALLATION

The riflescope operates with one CR2032 battery. Be sure that the battery is brand new and is installed with correct polarity (“–“sign goes inside the battery compartment).

To install the battery, unscrew the battery compartment cover (4, Fig 1), insert the battery observing polarity, and screw the cover back.

7. RETICLE ILLUMINATION

The reticle illumination is digitally controlled by the switch (6, Fig.1). A short pressing of this switch sets the reticle to the illumination position, which was set the last time when the riflescope was used.

The reticle illumination is adjusted by pressing and depressing the switch. You can choose among seven possible illumination levels. If the battery is discharged, the reticle will blink being turned on.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Daytime Rifle Scope Page Important Information Precautions Table of Contents For numbering see the next Page Brief Description Delivery SET Technical Specifications Reticle description Page = 3.438*MOA Minute of Angle Magnification Page Page Page Number Correspond to the example with the boar on Installation on the Weapon Battery Installation Using the NC 3-12x50 Riflescope Page Adjustment on the Weapon Page Page Storage and Maintenance Illumination of the reticle is not working Warranty Customer Support Acceptance Certificate Newcon Optik 
Top Page Image Contents