Newcon Optik NC 3-12X50 operation manual Adjustment on the Weapon

9. ADJUSTMENT ON THE WEAPON

The riflescope is equipped with tactical multi- revolving reticle adjustment mechanism. Screws of the adjustment mechanism are terminated with knobs (5, Fig.1) with the horizontal and vertical scales, which allow precise determining of the clicks and turns of the knob(s).

Adjustment is performed as follows:

1)Mount the riflescope to the weapon;

2)Find a target or choose a point of aim;

3)Lock the weapon on the shooting stand;

4)Aim the weapon at the target using iron sights installed on the weapon (if it is possible). At this stage you can use laser boresighting riflescope (LBS, to be purchased separately), which is inserted into the barrel of the weapon and points to the geometrical point of the barrel extension:

5)By rotating the windage/elevation adjustment knobs, achieve overlapping of the cross hair with the aiming point indicated by the iron sight or LBS;

6)Take the weapon from the stand and remove LBS;

24