Newcon Optik NC 3-12X50 operation manual Illumination of the reticle is not working

Page 28

11.TROUBLESHOOTING

Unit does not focus.

Rotate the eyepiece as described above in this manual. If the riflescope cannot be focused, wipe optical components with a clean optical cloth.

Illumination of the reticle is not working.

Make sure the battery is installed correctly and not discharged.

Condensation on the riflescope.

Use special anti-fogging liquids like the ones for eyeglasses during cold weather conditions.

Boresighting problems.

Make sure that the riflescope is mounted correctly. Make sure that riflescope is securely glued in the fixation rings, and that the fixation rings are attached to the weapon securely without slack.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Daytime Rifle Scope Page Important Information Precautions Table of Contents For numbering see the next Page Brief Description Delivery SET Technical Specifications Reticle description Page = 3.438*MOA Minute of Angle Magnification Page Page Page Number Correspond to the example with the boar on Installation on the Weapon Battery Installation Using the NC 3-12x50 Riflescope Page Adjustment on the Weapon Page Page Storage and Maintenance Illumination of the reticle is not working Warranty Customer Support Acceptance Certificate Newcon Optik 
Top Page Image Contents