SIIG 04-0418A manual Software Installation, Windows2000, Windows XP/Server

Software Installation

This section provides information on how to install the eSATA II ExpressCard RAID drivers.

Windows2000

1.Install the ExpressCard then boot up Windows.

2.At Found New Hardware Wizard, click Next.

3.Select Search for a suitable driver for my device (recommended), then click Next.

4.InsertthedriverCD,checkCD-ROMdrives,uncheck the other boxes, click Next, then click Next again.

5.Click Finish.

6.Repeat steps 2-5.

7.Restart Windows to complete the installation.

When Windows resumes, go to SATARaid5 GUI on page 4 and install the RAID utility.

Windows XP/Server 2003

1.Install the ExpressCard then boot up Windows.

2.At the Found New Hardware Wizard:

XP (w/SP1 or earlier)/Server 2003: continue to step 2.

XP (w/SP2 or later)/Server 2003 (w/ SP1 or later): select No, not at this time, then click Next.

3.Insert the driver CD, select Install the software automatically (Recommended), and click Next.

4.Accept the default entry, then click Next.

5.Click Finish.

6.Repeat steps 2-5.

7.Restart Windows to complete the installation.

When Windows resumes, go to SATARaid5 GUI on page 4 and install the RAID utility.

3