To Verify Windows 2000/XP/2003 Installation
1.Right click My Computer and click Manage.
2.Select Device Manager.
3.Double click SCSI and RAID controllers, then double click Silicon Image Sil 3132 SoftRaid 5 Controller to display driver properties. A message This device is working properly is displayed in the dialog box, the driver has been correctly installed.
SATARaid5 GUI
The SATARaid5 GUI provides the user an easy way to configure and monitor your RAID set.
Installing SATARaid5 GUI
1.Place the driver CD into the
2.At the Windows desktop click Start, then Run.
3.Type D:\Setup.exe, then click OK. (Change D: to match your
4.Click Next, then click Next again.
5.At the Select Components box, uncheck RAID5 Driver, then click Next.
6.Follow the
SATARaid5 GUI Overview
The installation program configures the SATARaid5 GUI to automatically start when Windows is started. If the GUI does not automatically start or is closed by the user, choose the SATARaid5 program from the start menu to launch the program. Upon launching the GUI, the main window should appear similar to the following.
4
