X6700HRT
COMMERCIAL ELLIPTICAL TRAINERS
HARDWARE INCLUDED
To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Elliptical Trainer to prevent loosening and noise. Also, during each assembly step, ensure that ALL bolts and screws are in place and partially threaded in before completely tightening any ONE bolt or screw.
HARDWARE INCLUDED
PINK BAG
M8x25L Socket Head Bolt | M8 Lock Washer | M10 Lock Washer |
Quantity: 4 | Quantity: 4 | Quantity: 4 |
|
|
|
M10x25L Socket Head Bolt
Quantity: 4
8x16x2T Washer
Quantity: 4
BLUE BAG
M5x12L Bolt | 10x24.5x1T Washer | M10 Nylon Nut |
Quantity: 2 | Quantity: 2 | |
| Quantity: 4 |
|
| M10x55L Socket Head Bolt |
|
| Quantity: 2 |
|
ORANGE BAG
M8x20L Socket Head Bolt |
| 8.2x18x1.5T Arc Washer |
Quantity: 4 |
| Quantity: 4 |
|
|
|
GREEN BAG
M8x12L Bolt
Quantity: 2
26x36x0.3T Wave Washer
Quantity: 2
End Cap
illustration not to scale
26x36x2T Wave WasherQuantity: 2 Quantity: 4
25.5x38x1T Washer
Quantity: 2
BLACK BAG
8x16x1T Washer
Quantity: 2
Spacer
Quantity: 4
M8 Nylon Nut
Quantity: 2
Plastic Connector
Quantity: 8
M5x15L Bolt
Quantity: 8
M8x25L Socket Head Bolt
Quantity: 8
M8 Lock Washer
Quantity: 8
M8x55L Socket Head Bolt
Quantity: 2
YELLOW BAG
M8x20L Panhead Bolt
Quantity: 4