Perreaux Silhouette SXCD owner manual

Page 15

The SXCD is designed to function with the standard CD player RC-5 remote control codes. For more information about the standard RC-5 remote control codes for CD players please visit www.perreaux.com/files/sxcd-rc5-codes.pdf on the Perreaux website.

Caution!

The SXCD is designed to function with the standard CD player RC-5 remote control codes. For more information about the standard RC-5 remote control codes for CD players please visit www.perreaux.com/files/sxcd-rc5-codes.pdf on the Perreaux website.

External IR Receiver

Alternately, by using an external infrared (IR) receiver, commands can be received from a universal or programmable remote control which uses the standard CD player RC-5 remote codes.

The stereo 3.5mm plug of the infrared (IR) receiver must follow the specifications as per the diagram below:

Sleeve: Ground (GND)

Ring: +ve

Tip: Signal

More information about the infrared (IR) receiver can be obtained from your Perreaux dealer or found on the Perreaux website at www.perreaux.com/files/sxcd-ir-receiver.pdf.

Serial Number/Voltage Label

The serial number is unique to your SXCD. Please record this number and store it in a safe place. For any service related enquiry, please be prepared to quote the product serial number to Perreaux personnel or their service representative.

The voltage displayed in this area is the ONLY voltage that can be accepted by the unit.

Never attempt to connect the unit to the incorrect voltage.

AC Mains Input

An IEC-standard mains input is provided at the rear of the unit. The AC cord set is removable, allowing it to be upgraded at your will.

On/Off Switch

When operating the switch down, power is applied to the SXCD compact disc player.

14

Image 15

Contents Compact Disc Player Silhouette SXCDPage This page has intentionally been left blank Perreaux Silhouette Series Introducing theiiImportant Safety Instructions Table of Contents 1Unpacking and Placement Instant Install Turn on your preamplifier Electronics Module Pressing and holding this button will scan backwards through the currently playing disc. Upon releasing the button, the disc will play. If the start of the disc is reached the disc will stop The 50-wayheader allows connection to the SXCD transport unit using the ribbon cable supplied The RJ45 pins are configured for RS232 as follows The SXCD compact disc player facilitates this functionality by allowing the internal master clock to be disabled and sourced from an external device, such as an external digital to analog converter DAC Page Use only the supplied 50-wayribbon cable Transport ModuleUnderside Functions Electronics InterfaceThe disc drawer glides out to accept a compact disc and retracts to play it. Place the disc in the drawer label-sideup and make sure the disc is properly centred in the tray Placement Options 6Special Design Philosophies John Pawson writes Special Design Features The increased 4x-8xread speed of the optical drive, compared with 1x-2xspeeds of standard mechanisms, gives the drive more opportunity for error correction - ensuring the audio data stream is a true reflection of what is presented on the compact disc Conducted and radiated digital noise can wreak havoc on power supplies and sensitive circuits. Filtering is heavily employed throughout to stop conducted digital noise infecting power supplies and sensitive circuits, and greatly reduce radiated noise Care and Maintenance Warranty Information S I L H O U E T T E S X C D Extended Warranty3 Year Extended Warranty Form Registration FormTroubleshooting Guide Check that a disc is inserted for the SXCD to play 12Specifications Transport Component Crosstalk is caused by stray inductances and capacitances between components and lines, which results in unintentional mixing of stereo signals. Meticulous wire routing ensures excellent high-frequencyseparation Physical Dimensions Page Contact Details Installation Notes