Perreaux Silhouette SXCD owner manual Check that a disc is inserted for the SXCD to play

Page 28

Check that a disc is inserted for the SXCD to play.

I can hear a hum coming through my loud speakers

pLINK functions don’t work

RC-5 codes don’t work

No disc present

Check that a disc is inserted for the SXCD to play.

No volume setting

Make sure that the volume on your preamplifier or integrated amplifier is set to a suitable level.

Incorrect input

Confirm that the SXCD output is connected to the appropriate source input of the preamplifier or integrated amplifier.

Loud speakers not connected

Check that your loud speakers are firmly connected via cables into the binding posts n the rear of the amplifier.

Input sockets and/or output binding posts corroded

Check that RCA sockets and binding posts on the SXCD and other associated equipment are all free from corrosion.

Interconnect cables damaged

Make sure that the integrity of your interconnect cables is sound and they are firmly connected to your preamplifier or integrated amplifier and the SXCD CD player.

SXCD is close to external interference

Check the proximity of your SXCD to any possible source of EMI and/or RF interference, for example computers, televisions, amplifiers, speakers, etc. Ideally the SXCD should be placed as close as possible to your preamplifier or integrated amplifier.

Cable not plugged in

Ensure the pLINK cable is connected at both ends, to the SXCD and the controller device.

Connectors wired incorrectly

Check that the pLINK cable is wired correctly to interface with the controller device.

Incompatible remote codes

Make sure the remote control supports CD player RC-5 codes.

Weak remote batteries

The remote control’s batteries may need to be replaced, also check they are inserted correctly.

27

Image 28

Contents Silhouette SXCD Compact Disc PlayerPage This page has intentionally been left blank Introducing the Perreaux Silhouette SeriesiiImportant Safety Instructions Table of Contents 1Unpacking and Placement Instant Install Turn on your preamplifier Electronics Module Pressing and holding this button will scan backwards through the currently playing disc. Upon releasing the button, the disc will play. If the start of the disc is reached the disc will stop The 50-wayheader allows connection to the SXCD transport unit using the ribbon cable supplied The RJ45 pins are configured for RS232 as follows The SXCD compact disc player facilitates this functionality by allowing the internal master clock to be disabled and sourced from an external device, such as an external digital to analog converter DAC Page Transport Module Underside FunctionsElectronics Interface Use only the supplied 50-wayribbon cableThe disc drawer glides out to accept a compact disc and retracts to play it. Place the disc in the drawer label-sideup and make sure the disc is properly centred in the tray Placement Options 6Special Design Philosophies John Pawson writes Special Design Features The increased 4x-8xread speed of the optical drive, compared with 1x-2xspeeds of standard mechanisms, gives the drive more opportunity for error correction - ensuring the audio data stream is a true reflection of what is presented on the compact disc Conducted and radiated digital noise can wreak havoc on power supplies and sensitive circuits. Filtering is heavily employed throughout to stop conducted digital noise infecting power supplies and sensitive circuits, and greatly reduce radiated noise Care and Maintenance Warranty Information Extended Warranty 3 Year Extended Warranty FormRegistration Form S I L H O U E T T E S X C DTroubleshooting Guide Check that a disc is inserted for the SXCD to play 12Specifications Transport Component Crosstalk is caused by stray inductances and capacitances between components and lines, which results in unintentional mixing of stereo signals. Meticulous wire routing ensures excellent high-frequencyseparation Physical Dimensions Page Contact Details Installation Notes