Perreaux Silhouette SXCD owner manual Electronics Module

Page 10

Electronics Module

3	Electronics Module

Front Panel Functions

Status LED

This blue LED indicates the status of your SXCD compact disc player.

Off

This indicates the power to the CD player is switched off.

On

The LED constantly illuminated indicates the SXCD is powered and either playing a disc or is in an idle state ready for a disc to be played.

Slow Flashing

If the LED is flashing slowly, the CD player is paused.

Moderate Flashing

If the LED is flashing at a moderate rate, the CD player is busy and may not respond immediately to any user interface.

Fast Flashing

If the LED flashes fast, the CD player has encountered an error, such as a bad disc or incompatible media format.

Skip/Scan Back

Pressing this button momentarily returns to the beginning of the current track. Pressing multiple times quickly in succession returns to the beginning of the applicable track, until the start of the disc is reached.

9

Image 10

Contents Silhouette SXCD Compact Disc PlayerPage This page has intentionally been left blank Introducing the Perreaux Silhouette SeriesiiImportant Safety Instructions Table of Contents 1Unpacking and Placement Instant Install Turn on your preamplifier Electronics Module Pressing and holding this button will scan backwards through the currently playing disc. Upon releasing the button, the disc will play. If the start of the disc is reached the disc will stop The 50-wayheader allows connection to the SXCD transport unit using the ribbon cable supplied The RJ45 pins are configured for RS232 as follows The SXCD compact disc player facilitates this functionality by allowing the internal master clock to be disabled and sourced from an external device, such as an external digital to analog converter DAC Page Electronics Interface Transport ModuleUnderside Functions Use only the supplied 50-wayribbon cableThe disc drawer glides out to accept a compact disc and retracts to play it. Place the disc in the drawer label-sideup and make sure the disc is properly centred in the tray Placement Options 6Special Design Philosophies John Pawson writes Special Design Features The increased 4x-8xread speed of the optical drive, compared with 1x-2xspeeds of standard mechanisms, gives the drive more opportunity for error correction - ensuring the audio data stream is a true reflection of what is presented on the compact disc Conducted and radiated digital noise can wreak havoc on power supplies and sensitive circuits. Filtering is heavily employed throughout to stop conducted digital noise infecting power supplies and sensitive circuits, and greatly reduce radiated noise Care and Maintenance Warranty Information Registration Form Extended Warranty3 Year Extended Warranty Form S I L H O U E T T E S X C DTroubleshooting Guide Check that a disc is inserted for the SXCD to play 12Specifications Transport Component Crosstalk is caused by stray inductances and capacitances between components and lines, which results in unintentional mixing of stereo signals. Meticulous wire routing ensures excellent high-frequencyseparation Physical Dimensions Page Contact Details Installation Notes