Perreaux Silhouette SXCD owner manual 1Unpacking and Placement

Page 7
1Unpacking and Placement

1Unpacking and Placement

Unpacking Procedure

Note:

Box

Contents

Placing Your

SXCD

Ventilation Requirements

6

The two components which comprise the SXCD CD player are packaged for maximum protection. To open, sit each box upright and cut the reinforced tape at the top of each box. Each module can now be removed.

Pull the foam protecting end-caps off either side of each of the modules and remove the black material covering.

The SXCD Compact Disc Player is now unpacked and ready for further installation.

Please retain all packaging material for future transport.

1 x SXCD Compact Disc Player Electronics

1 x SXCD Compact Disc Player Transport

1 x Product manual

1 x Detachable AC power cord

1x 50-way ribbon cable

1x 75< coaxial cable

1x BNC to RCA adaptor

3 x Performance analysis charts

The SXCD should generally be placed close to your preamplifier or integrated amplifier, thus keeping interconnect cabling between the SXCD and associated components as short as practical. This will reduce the systems susceptibility to radio frequency (RF) interference and the negative effects associated with long cables.

The SXCD is a low power electronic device. Ventilation requirements are not considered an important factor in product placement.

In the event that the SXCD is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 13).

Image 7
Contents Compact Disc Player Silhouette SXCDPage This page has intentionally been left blank Perreaux Silhouette Series Introducing theiiImportant Safety Instructions Table of Contents 1Unpacking and Placement Instant Install Turn on your preamplifier Electronics Module Pressing and holding this button will scan backwards through the currently playing disc. Upon releasing the button, the disc will play. If the start of the disc is reached the disc will stop The 50-wayheader allows connection to the SXCD transport unit using the ribbon cable supplied The RJ45 pins are configured for RS232 as follows The SXCD compact disc player facilitates this functionality by allowing the internal master clock to be disabled and sourced from an external device, such as an external digital to analog converter DAC Page Use only the supplied 50-wayribbon cable Transport ModuleUnderside Functions Electronics InterfaceThe disc drawer glides out to accept a compact disc and retracts to play it. Place the disc in the drawer label-sideup and make sure the disc is properly centred in the tray Placement Options 6Special Design Philosophies John Pawson writes Special Design Features The increased 4x-8xread speed of the optical drive, compared with 1x-2xspeeds of standard mechanisms, gives the drive more opportunity for error correction - ensuring the audio data stream is a true reflection of what is presented on the compact disc Conducted and radiated digital noise can wreak havoc on power supplies and sensitive circuits. Filtering is heavily employed throughout to stop conducted digital noise infecting power supplies and sensitive circuits, and greatly reduce radiated noise Care and Maintenance Warranty Information S I L H O U E T T E S X C D Extended Warranty3 Year Extended Warranty Form Registration FormTroubleshooting Guide Check that a disc is inserted for the SXCD to play 12Specifications Transport Component Crosstalk is caused by stray inductances and capacitances between components and lines, which results in unintentional mixing of stereo signals. Meticulous wire routing ensures excellent high-frequencyseparation Physical Dimensions Page Contact Details Installation Notes