TABLE OF CONTENTS
| Page |
| Page |
Safety Instructions | 2 | Storage | 20 |
Before You Begin | 4 | Maintenance | 20 |
Equipment Warning & Notice Labels | 5 | Conditioning Guidelines | 21 |
Hardware Identification Chart | 6 | 22 | |
Assembly Instructions | 7 | Warranty | 23 |
Set Up Instructions | 13 | Product Parts Drawing | 24 |
Operational Instructions | 14 | Parts List | 25 |
Computer Instructions | 15 | Fax/Mail Ordering Form | 27 |
SAFETY INSTRUCTIONS
WARNING: To reduce the risk of serious injury, read the following Safety Instructions before using the Magnetic Fusion 7250 Bike.
1.Read all warnings posted on the Magnetic Fusion 7250 Bike.
2.The Magnetic Fusion 7250 Bike should only be used after a thorough review of the Owner's Manual.
3.We recommend that two people be available for assembly of this product.
4.Keep children away from the Magnetic Fusion 7250 Bike. Do not allow children to use or play on the Magnetic Fusion 7250 Bike. Keep children and pets away from the Magnetic Fusion 7250 Bike when it is in use.
5.The Magnetic Fusion 7250 Bike is not a freewheeling exercise bike; therefore, pedal speed should be reduced in a controlled manner to prevent injury from spinning pedals.
6.Make sure the Magnetic Fusion 7250 Bike is properly assembled and that all nuts and bolts are tightened before use.
7.It is recommended that you place this exercise equipment on an equipment mat.
8.Set up and operate the Magnetic Fusion 7250 Bike on a solid level surface. Do not position the Magnetic Fusion 7250 Bike on loose rugs or uneven surfaces.
9.Make sure that adequate space is available for access to and around the Magnetic Fusion 7250 Bike.
10.Adjust the FOOT STANDS(64) and STAND(68) so that the Magnetic Fusion 7250 Bike sits on the floor without rocking. See page 13 for detailed leveling instructions.
11.Before using, inspect the Magnetic Fusion 7250 Bike for worn or loose components, and tighten or replace any loose or worn components prior to use.
12.Before using, always check the SEAT CARRIAGE(7) to be sure it is secure. The ADJUSTMENT KNOB(49) must be inserted into one of the holes in the REAR FRAME(5) and tightened.
13.Each user should adjust the seat per instructions on page 14.
14.Do not attempt to adjust the seat while you are on the Magnetic Fusion 7250 Bike.
15.Consult a physician prior to commencing an exercise program and follow his/her recommendations in developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop and consult your physician.
16.Follow your physician's recommendations in developing your own personal fitness program.
17.Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train within them. Always use common sense when exercising.
18.Do not wear loose or dangling clothing while using the Magnetic Fusion 7250 Bike.
19.Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross training shoes that fit well, provide foot support, and feature
20.Care should be taken in mounting or dismounting the Magnetic Fusion 7250 Bike.
21.The Magnetic Fusion 7250 Bike should not be used by persons weighing over 300 pounds.
22.The Magnetic Fusion 7250 Bike should be used by only one person at a time.
23.Do not ride the Magnetic Fusion 7250 Bike while standing up.
24.The Magnetic Fusion 7250 Bike is for consumer use only. It is not for use in public or semipublic facilities.
WARNING: Before starting any exercise or conditioning program you should consult with your personal physician to see if you require a complete physical exam. This is especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer from any illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.
2