STORAGE
1.To store the Magnetic Fusion 7250 Bike, simply keep it in a clean dry place.
2.Adjust the SEAT CARRIAGE(7) to the lowest position. The Magnetic Fusion 7250 Bike is approximately 55 3/4 inches long x 24 3/8 inches wide x 50 3/8 inches tall (max.). These dimensions will vary. Please measure your Magnetic Fusion 7250 Bike if exact dimensions are needed.
3.To move the Magnetic Fusion 7250 Bike, lift the REAR STABILIZER(6) and the bike will roll on the WHEEL(62) on the FRONT STABILIZER(2).
MAINTENANCE
The safety and integrity designed into the Magnetic Fusion 7250 Bike can only be maintained when the Magnetic Fusion 7250 Bike is regularly examined for damage and wear. Special attention should be given to the following:
1.Use the PROGRAM BUTTONS on the COMPUTER(27) to select a program and verify that the Magnetic System provides different tensions. The Magnetic System should provide many years of use.
2.Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the left pedal has left hand threads and is tightened by turning counterclockwise. The right pedal has right hand threads that are tightened by turning clockwise.
3.Verify that the WARNING LABEL(109) is in place and easy to read. Call Stamina Products immediately at
4.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5.Worn or damaged components shall be replaced immediately or the Magnetic Fusion 7250 Bike removed from service until repair is made.
6.Only Stamina Products supplied components shall be used to maintain/repair the Magnetic Fusion 7250 Bike.
7.Keep your Magnetic Fusion 7250 Bike clean by wiping it off with an absorbent cloth after use.
20