Life Fitness X7 manual Stride Length Adjustment not Working

Page 36

STRIDE LENGTH ADJUSTMENT NOT WORKING

Turn the power off on the cross-trainer. Turn the power back on after 30 seconds and try the stride adjustment again.

STRIDE LENGTH IS AUTOMATICALLY CHANGING

Check to see if the Leg Sculptor mode is turned on. When on, the Icon Leg Sculptor key is illuminated. Leg Sculptor automatically adjusts the stride every 2 minutes during a workout. To turn Leg Sculptor mode off press the Leg Sculptor key.

STRIDE ADJUSTMENT SEEMS LOUD

Some noise is normal. The sound of the motors will vary depending on the load.

STRIDE LENGTH FEELS LONGER ON ONE SIDE

Turn the unit off. Turn the unit on after 30 seconds and check to see if the stride length still feels longer on one side.

TOTAL BODY ARMS FEEL LOOSE

Remove the moving arm pivot covers and check to make certain the bolt holding the total body arms in place is fully tightened. If the total body arms still feel loose, you may need to disassemble the total body arms and make sure all of the proper hardware from the assembly instructions was used.

ACTIVITY ZONE KEEPS TURNING OFF

The activity zone is preset to turn the backlight off after 5 minutes in order to save power and LCD life. If you would like the display to always be turned on sleep mode can be turned off in the settings menu.

WHEN ACTIVITY ZONE TURNS OFF THE STRIDE CHANGES

The stride will always return to the home position of 18 inches (46 cm) when entering sleep mode. This is so the next time you get on the cross-trainer it is at its lowest position. Sleep mode is a setting that turns the display backlight off to save power and LCD life. It is preset to 5 minutes. If you would like the display to always be turned on sleep mode can be turned off in the settings menu.

35

Page 35 Page 37
Image 36
Page 35 Page 37
Contents S T R U C T I O N S Corporate Headquarters International OfficesWelcome / Safety / Caution IntroductionLife Fitness Cross-Tainer Table of Contents Page Important Safety Instructions Save These Instructions for Future Reference Save These Instructions for Household USE Grounding Instructions Assembly Instructions Page Tools Needed Connect Base Wiring Parts None Assemble the Rocker Arms Moving Arm Pivot Covers Page Assemble Front Base Shroud Console Bracket to the Upright Tools Initial Setup Powering UP the CROSS-TRAINER Main Features Contact Heart Rate Activity Zone Stride Length Functionality Total Body Trainer Mode Functionality Resistance Level & Intensity Level FunctionalityLEG Sculptor Mode Functionality LEG Sculptor Mode Settings Menu Navigating the Settings MenuExiting the Settings Menu Settings Menu Options Audio Adjustment InstructionsSleep Adjustment Instructions Contrast Adjustment Instructions Unit Adjustment Instructions Language Adjustment Instructions Service & Product Maintenance TroubleshootingStride Length Adjustment not Working When Activity Zone Wakes UP the Stride Changes Errors E1 E4 Preventative Maintenance Tips HOW to Obtain Product Service For Product Service InternationallySpecifications Assembled DimensionsWarranty Information Product Registration HOW to GET Parts & Service Exclusive WarrantyWhat YOU Must do Changes in Warranty not Authorized Warranty PeriodsmodelEffect of U.S. State Laws F E F I T N E S S . C O M
Related manuals
Manual 46 pages 38 b
Top Page Image Contents