JVC CA-MXJ55R, CA-MXJ530R manual CD Direct Recording, Dubbing Tapes

PROGRAM

/ RANDOM

Put a recordable cassette into deck B.

		Continued
To stop recording temporarily (except when the	REC PAUSE	CD Direct Recording
playback source is deck A), press REC PAUSE on
the remote control.		Everything on the CD goes onto the tape in the order it is on
To resume recording, press TAPE 23.		the CD, or according to the order you have made for Program
To remove the cassette, press EJECT 0for deck B.		play.

English

To record on both sides — Reverse Mode	MODE
	REVERSE
Press REVERSE MODE so that the Reverse Mode
indicator lights up as —

•When using the Reverse Mode for recording, start recording in the forward (3) direction first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as —

To record an AM (MW/LW) station — Beat Cut

While recording an AM (MW/LW) broadcast, beats may be heard (which are never heard when listening to the broadcast without recording it).

If this occurs, press PROGRAM/RANDOM repeatedly, while recording, until the beats are reduced.

•Each time you press the button, the display changes to show the following:

CUT1CUT2 CUT3 CUT4

Dubbing Tapes

It is preferable that the tape type (type I or II) you record from be the same as the tape type you record onto when dubbing tapes.

1 Press TAPE 23, then 7.

2 Put the source cassette in deck A, and a recordable cassette into deck B.

•Put the cassettes in both decks so that the tapes will run in the forward (3) direction.

DUBBING

3 Press DUBBING.

Dubbing starts.

To stop during dubbing, press 7.

To remove the cassette, press 0EJECT for deck A and EJECT 0 for deck B.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator lights up as —

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as —

1

2 Place a disc correctly on the circle of the disc tray, with its label side up.

3			CD3
	Press one of the disc number		CD2
	buttons (CD 1 to CD 3) to select
	the disc, then 7.		CD1
4	Press CD REC START.
	“CD REC” appears, and the	indicator	CD REC START

lights up on the display.

Deck B starts recording and the CD player starts playing.

When the recording is done, “CD REC FINISHED” appears on the display, and the CD player and deck B stop.

To stop during CD Direct Recording, press 7.

To remove the cassette, press EJECT 0for deck B.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator lights up as —

•When using the Reverse Mode for CD Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be recorded at the beginning of the reverse side (2).

If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as —

– 20 –