Ironman Fitness Elliptical, 130e owner manual Step

Page 6

Assembly

FIGURE 1

Step 1:

Using Two Carriage Bolts (46), Cap Nuts (49), Hex Head Screws (63) and Four Washers (50), attach the Left and Right Extrusions to Main Frame.

Step 2:

Attach Aluminum Extrusion Plate (15) to the Left and Right Extrusions using Four M8x95mm Hex Head Screws (80), M8x19mm Washers (50), and 8mm Locknuts (49).

Figure 1

FIGURE 2

Step 1:

Using Three M6x45mm Screws

(86)and M6x16mm Washers (85) attach Left Foot Pedal (16) to the Left Pedal Tube Assembly (31).

Repeat for right side.

Figure 2

Image 6
Contents 130e Table of Contents Important Safety Information Safety Precautions and TipsBefore You Start Assembly Instructions for AssemblyStep Step Assembly Congratulations Console Instructions Console ButtonsMoving Instructions Page Target Heart Rate Zone Monitoring Your Heart RateWarm Up Exercises Exercise GuidelinesExploded View Parts List 130e Parts List Rev BWarranty Information Ironman Fitness 130e Limited Warranty Residential Warranty