Wall Mount Installation Rear Vent | Kobe Range Hoods CH7936SQB

WALL MOUNT INSTALLATION – REAR VENT

***This installation only applied with the purchase of a duct cover.

Preparation before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

-Decide the location of the venting pipe from the hood to the outside. Refer to Figure 21.

-A straight, short venting run will allow the hood to perform more efficiently.

-Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

-Use duct tape to seal the joints between pipe sections.

-If necessary, prepare back wall frame with cross framing lumber for secure installation.

-Using references on Table 2 and measurements on Page 22-23, decide the level of the lumber. Refer to Figure 22.

Hood Preparation before Installation

-Temporarily wire the hood to test for proper operation before installing.

-Peel protective film off the hood and the duct cover (if any).

-Remove the screws on the vent cover (rear) and cut along the line of the inner vent cover (rear) opening. Refer to Figure 23.

-Cut the vent cover (rear) opening and reverse to the other side. Refer to Figure 24.

Figure 21

Inner Vent

Cover (Rear)

Figure 22

Reversed

Vent Cover

(Rear)

Figure 23

Figure 24

CH7930SQB, CH7948SQB, CH7942SQB, CH7936SQB specifications

The Kobe Range Hoods CH7936SQB, CH7948SQB, CH7930SQB, and CH7942SQB combine elegance and power, revolutionizing the way kitchens handle ventilation. These models boast an innovative design that seamlessly merges style with functionality, making them a top choice for modern households.

One of the standout features of these range hoods is their robust air extraction capabilities. Each model is equipped with a powerful motor that ensures efficient removal of smoke, grease, and odors. The CH7936SQB offers a 760 CFM airflow, while the CH7948SQB provides an impressive 900 CFM, making it perfect for larger kitchens and heavy cooking sessions. The CH7930SQB and CH7942SQB also showcase excellent airflow rates, catering to various kitchen sizes and cooking habits.

The range hoods feature multiple speed settings, allowing users to adjust the power according to their cooking needs. A sleek control panel with conveniently located buttons makes operation intuitive. LED lights are integrated into these models, illuminating the cooking surface and enhancing visibility while preparing meals.

Another significant advantage of Kobe Range Hoods is their quiet operation. Operating at low noise levels, they provide efficient ventilation without disrupting the kitchen ambiance. This aspect is especially valuable in open-concept living spaces, where noise reduction is essential.

Constructed from high-quality stainless steel, the CH7936SQB, CH7948SQB, CH7930SQB, and CH7942SQB models are not only durable but also easy to clean. Their non-ducted capability allows for flexible installation options, making them adaptable to various kitchen layouts.

The grease filters in these range hoods are easily removable and dishwasher-safe, ensuring that maintenance is hassle-free. This feature promotes hygiene and preserves the overall performance of the hood.

With a contemporary design that complements any kitchen décor, the Kobe Range Hoods also prioritize energy efficiency. They are designed to consume minimal power while delivering maximum performance.

In summary, the Kobe Range Hoods CH7936SQB, CH7948SQB, CH7930SQB, and CH7942SQB offer a blend of style, efficiency, and convenience. With powerful airflow, multiple settings, quiet operation, and easy maintenance, these models stand out as ideal choices for anyone seeking an effective kitchen ventilation solution. Enhancing both functionality and aesthetics, they are a worthwhile investment for modern cooking environments.