JVC CA-MXG500, SP-MXG500 manual Programing the Playing Order of the Tracks --Program Play

Page 17

Continued

Programing the Playing Order of the Tracks —–Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

•To use Repeat play (see page 15) for Program play, press REPEAT after starting Program play.

On the unit ONLY:

1 Load CDs.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press PROGRAM so that

PROGRAM

 

RA

“PROGRAM” appears on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display.

 

 

The PRGM (program) indicator also lights up on the display.

•All Disc play mode is selected automatically. You cannot select One Disc play mode for Program play.

•If a program has been stored in memory, the program is called up.

3 Press one of the disc number

 

1

 

2

 

3

buttons (CD1, CD2, and CD3) to

CD

CD

CD

 

 

 

 

 

 

 

 

 

select the disc number you want to play.

Track number

Disc number

Program step number

4 Press 4or ¢ to select the track number, then press SET.

Each time you select a track and press SET, the selected track number is added to the track number indicator.

SET

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

6 Press CD 6.

The tracks are played in the order you

CD

have programed.

 

To stop during play, press 7.

To exit from Program play mode, press PROGRAM again before or after play so that the unit enters All Disc play mode. (The program you have made is stored in memory until you turn off the unit, eject the carrousel, or erase the program.)

• Program play mode is also canceled when you press 0.

To modify the program

CANCEL

Before playing, you can erase the last programed /DEMO track shown on the display by pressing CANCEL/ DEMO.

•Each time you press the button, the last programed track is erased from the program.

To check the program during play, press ¢(or 4) so that the playing track will change according to the program (or reverse) order.

To add tracks in the program before play, simply select the disc numbers and/or track numbers you want to add by following steps 3 and 4 of the programing procedure.

To erase the entire program before or during play, press 7

twice.

•Turning the power off or ejecting the carrousel will also erase the stored memory.

If you try to program a 33rd track

“FULL” will appear on the display.

If your entry is ignored

You have tried to program a track from an empty tray, or a track number that does not exist on the CD. Such entries are ignored.

– 14 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Instructions Mises en garde, précautions et indications diverses For Canada/pour le Canada About This Manual PrecautionsIntroduction Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel Display window Front PanelSee pages in the parentheses for details 0Carrousel open/close button 12, 13Remote Control Remote ControlGetting Started Connecting AntennasUnpacking FM antennaAM antenna Connecting SpeakersRelease the finger from the clamp Cancelling the Display Demonstration Connecting Other EquipmentOn the unit only To connect an analog componentSetting the Clock Turning On or Off the PowerOn the unit only Press CLOCK/TIMER Common OperationsTo turn down the volume level temporarily Adjusting the VolumeReinforcing the Bass Sound Selecting the Sound ModesPresetting Stations Tuning in a StationTuning in a Preset Station Listening to the RadioPlaying Back CDs-All Disc and One Disc Playing Back CDsLoading CDs Press one of the disc number Buttons CD1, CD2 or CD3 Basic CD OperationsLoad CDs Press one of the disc number Buttons CD1, CD2 or CD3 youPress one of the disc number Buttons CD1, CD2, and CD3 to Programing the Playing Order of the Tracks --Program PlayRepeating Tracks or CDs--Repeat Play Playing at Random--Random PlayProhibiting Disc Ejection--Tray Lock Press Random so that Random M Random appears on the displayPlaying Back a Tape Playing Back TapesPress Eject 0 for the deck you want to use Close the cassette holder gentlyRecording a Tape on Deck B RecordingPress REC START/STOP To keep the best recording and playback sound qualityCD Synchronized Recording Dubbing TapesOn the unit only Press Tape 3, then Press DubbingUsing Daily Timer Using the TimersPress CLOCK/TIMER again Using Recording TimerOn the remote control only Press Sleep Using Sleep TimerTimer Priority Cleaning the unit MaintenanceHandling discs Handling cassette tapesSymptom TroubleshootingSpecifications Authorized Service Centers Limited Warranty Memo Memo 0102KSMMDWSAM
Top Page Image Contents