Precor P30 manual Installing the Upright Support and Cables

Page 74

20

Assembling and Maintaining UBK 800-Series Upright Exercise Bikes

Installing the Upright Support and Cables

DANGER Do not attempt to connect electrical power until all assembly procedures are complete and the console is properly installed.

Before you begin this procedure, retrieve the cables for the console that you plan to install on this exercise bike. The cables are packed with the console.

Note: You will need the help of another person while performing the procedure.

To prepare the bike for installation of the upright support:

1.Retrieve the cables from the box in which the console was shipped.

2.Using a #2 Phillips screwdriver, remove the two #10 x

1-inch self-tapping screws holding the rear cover in place. Pull the upright rear cover back to remove it, then set it aside.

Figure 2: Rear cover removal

3.Remove the two #10 x 1-inch self-tapping screws holding the top cover in place, then lift it off.

Figure 3: Top cover removal

Page 73 Page 75
Image 74
Page 73 Page 75
Contents Operating and Maintaining the P30 Console Page Page Intellectual Property Notice Edition InformationTrademark Note Important Safety Instructions Safety PrecautionsOperating and Maintaining the P30 Console Important Safety Instructions Operating and Maintaining the P30 Console Hazardous Materials and Proper Disposal Product Recycling and DisposalCardiovascular Type Equipment Safety Approvals for Cardiovascular EquipmentRegulatory Notices for Cardiovascular Exercise Equipment Radio Frequency Interference RFIDébranchez avant de réparer Industry CanadaEuropean Applications North American 120-volt, 20-amp power receptacle Electrical Recommendations 120 V and 240 V TreadmillsObtaining Service IEC-320 C13 and C14 plugsOperating and Maintaining the P30 Console Table of Contents Operating and Maintaining the P30 Console Getting Started Activating the Console for Self-Powered EquipmentActivating the Console for Self-Powered Equipment Optional Use of the Power Adapter Identifying Parts of the Console Number Part Name Details AMTFor Self-powered Equipment For Treadmills Pauses treadmillPress Clear to delete the numbers Setting Up the Console System Settings5 1 5 6 To view the Club Parameters settingsNavigational keys for the system setting modes Key Select Language All Equipment Setting Club Parameter ValuesSafety Code Treadmill only Set Units All EquipmentSet Cool Down Time All Equipment Set Max Workout Time All EquipmentSet Max Pause Time All Equipment To create a custom program Creating a Custom WorkoutValue Range on or OFF Custom Program keys Equipment Key Name DescriptionHidden Programs Treadmill only Set Speed Limit Treadmill onlySet Incline Limit Treadmill only Value Range 0 to Set Resistance Range Bike onlySet Crossramp Auto Level EFX Dual only Informational Displays values To view the System settingsViewing the Informational Displays Value Information providedProduct Value Information provided Stride Count Reset ResetOdometer at Last Reset Records Belt Stride Count TracksEvent Log Event Description of Event Number Csafe access keys Keys Function User ID Entry with Csafe EquipmentUsing the Touch Heart Rate Feature Introducing Users to the P30 ConsoleHeart rate target zones Using a Chest Strap Transmitter To use a chest strap transmitterUsing the Treadmill Safety Clip Restart switchAttaching the safety clip Treadmill Auto Stop Automatic Stop Function Starting a Workout  Press Quick StartTo choose a workout goal before you begin exercising Starting a Preset Programmed WorkoutSetting Options To enter your Age and Weight during a workout Setting Options after You Begin a WorkoutTo choose a language setting before you begin exercising To choose a unit of measure before you begin exercisingPending Shutdown Self-Powered Equipment Pausing and Resuming an Exercise SessionPaused Externally Powered Equipment Ending a SessionStarting a Workout Manual Weight LossPrograms Heart RateCity Steps Climber only VarietyPerformance Fat Burn Climber onlyPyramid Climber only Rolling Hill Climber onlySteady Climb Climber only To remove dust and dirt from the console MaintenanceCleaning the Console and Display Changing the Belt Newer Model AMT Only Page Precor Incorporated Page Page Page 300715-241 rev D Important Safety Instructions Safety Precautions Important Safety Instructions 19.7 in. behind or in front the machine  Do not lean on or pull on the console at any time Educating Users Regulatory Notices for the Rfid Module Industry Canada PVS and P80 Regulatory Notice Industry Canada Obtaining Service Obtaining Updated Documentation Regulatory Notices for Cardiovascular Exercise Commercial Cardiovascular Equipment Limited Warranty To prepare the exercise bike for assembly Assembling the Exercise BikeUnpacking the Equipment To unpack the bikeFasteners Hardware Kit not to scaleRequired Tools Installing the Upright Support and Cables To prepare the bike for installation of the upright supportSide cover removal Upright support insertion Bolting the upright support into place Installing the Bottle Holder To install the bottle holderInstalling the Handlebars To install the handlebarsTo level the unit Making Sure the Unit Is StableBreaking in the Equipment Installing the Console Threading the Cable Assembly P80 To thread the cable assemblyConsole positioning on base unit Connecting Cables P80 Cable connections, P80 consoleTo connect the television cable Connecting the Television CableP80 internal cable connections Cable Connector Type Circuit LocationConnecting the television cable Connecting the Ethernet and Base Unit Data Cables Connecting the Ethernet and base unit data cablesConnecting the Heart Rate Sensor Cable Connecting the heart rate cableConnecting the Power Cable Connecting the power cableTo complete the installation Completing the Console Installation P80Threading the Cable Assembly P30 and P10 Console positioning on base unit Connecting Cables P30 and P10 Cable positioningCable connections, P30 and P10 consoles Cable Connector Type Circuit Location P30 and P10 internal cable connectionsCompleting the Console Installation P30 and P10 Verifying That the Heart Rate Display Is Operational To verify that the heart rate display is operationalDaily Cleaning Daily Inspection Storing the Chest Strap Quarterly MaintenanceTo perform quarterly maintenance To move the exercise bike Moving the EquipmentLong-Term Storage Rate of Motion Self-Powered FeaturesMinimum requirements for operation Symptoms of a Low Battery Informational Displays Prior to ShutdownUsing the Optional Power Adapter Optional Power Adapter KitReplacing the Battery Warranty Periods and Coverage Commercial Cardiovascular Equipment Limited WarrantyLimited Warranty Conditions and Restrictions Exclusive Remedies Exclusion of Consequential and Incidental Damages Complete this portion and keep for your recordsPage UBK 800-Series PAG/OM 300715-241 rev D
Related manuals
Manual 128 pages 32.57 Kb Manual 120 pages 21.26 Kb Manual 108 pages 45.23 Kb

P30 specifications

The Precor P30 is a top-of-the-line piece of fitness equipment designed for both home and commercial gym environments. Renowned for its durability and user-friendly interface, the P30 series embodies a perfect balance of functionality and innovative technology, making it an ideal choice for fitness enthusiasts.

One of the standout features of the Precor P30 is its ergonomic design. Every aspect of the machine has been engineered to provide comfort during workouts, reducing the risk of injury and enhancing performance. The adjustable features allow users of varying sizes to find a comfortable fit, ensuring a more effective workout regardless of the user's height or fitness level.

The P30 incorporates advanced technology with its intuitive user interface. The console features a large, easy-to-read display that provides real-time feedback on vital workout metrics such as time, distance, calories burned, and heart rate. This data helps users track their progress and stay motivated by understanding their performance on a deeper level. Additionally, the user-friendly navigation allows for easy access to a range of pre-set workout programs, catering to various fitness goals whether it be weight loss, endurance training, or muscle toning.

Another key characteristic of the Precor P30 is its sturdy construction. Built from high-quality materials, the machine is designed to withstand the rigors of daily use, whether in a home gym or a commercial facility. This robustness ensures that the P30 not only supports extensive workouts but also offers longevity, making it a worthwhile investment for any fitness facility.

The P30 also features Advanced Heart Rate Monitoring technology which allows users to keep tabs on their heart rate during workouts. By monitoring heart rate zones, individuals can optimize their cardio sessions for maximum efficiency and results. This feature is particularly beneficial for those looking to enhance their cardiovascular fitness or train for specific events.

In summary, the Precor P30 embodies the fusion of functionality, comfort, and advanced technology. Its ergonomic design, user-friendly interface, robust construction, and heart rate monitoring capabilities make it an exceptional choice for anyone serious about their fitness journey. Whether for personal use or in a commercial setting, the P30 stands out as a reliable and effective tool to help users achieve their fitness goals.
Top Page Image Contents