JVC RX-D202B, RX-D201S manual Selecting the Surround/DSP modes, When you select Auto Surround

Page 33

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. For details, see page 30.

Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments.

• To adjust the speaker output level, see page 22.

• When activating one of the Surround/DSP modes, you

can adjust CENTER TONE. (see page 24)

• When activating one of the Surround/DSP modes

(except Pro Logic IIx Music, Pro Logic II Music, NEO:6

Music, and ALL CH STEREO), you can adjust CENTER

ALIGN. (see page 24)

• When activating NEO:6 MUSIC, you can adjust CENTER

GAIN. (see page 24)

• When activating the DSP mode (except All Channel

Stereo mode), you can adjust the following settings:

EFFECT (see page 23)

LIVENESS (see page 23)

ROOM SIZE (see page 23)

On the front panel:

 

2

1,3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1Select and play any source.

•Make sure you have selected the input mode (analog or digital) correctly.

2Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

3Turn MULTI JOG to select the Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

• When activating “PLIIx MUSIC” and “PLII MUSIC”, you

DIGITAL

L C R

S.WFR LFE

can adjust the following settings:

CENTER WIDTH (see page 24)

DIMENSION (see page 24)

PANORAMA (see page 23)

Selecting the Surround/DSP modes

From the remote control:

2

1

1Select and play any source.

•Make sure you have selected the input mode (analog or digital) correctly.

2Press SURROUND repeatedly to select the Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

DIGITAL AUTO L C R

LS RS

AUTO SURROUND*1 Surround modes*2

HALL1HALL2LIVE CLUBDANCE CLUB

PAVILIONTHEATER1THEATER2

MONO FILM*3ALL CH STEREO*4

SURROUND OFF (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 30.

*3 If an incoming signal is a multi-channel (more than 2 channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the display.

When you select “AUTO SURROUND”

You can enjoy the Surround mode easily.

DIGITAL

S.WFR LFE

• For details about the Surround modes, see page 30.

LS RS

AUTO SURROUND*1 Surround modes*2

HALL1 HALL2 LIVE CLUB DANCE CLUB

PAVILION THEATER1 THEATER2

MONO FILM*3 ALL CH STEREO*4

SURROUND OFF (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 30.

*3 If an incoming signal is a multi-channel (more than 2 channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF” appears on the display.

• When “AUTO SURROUND” is activated, the AUTO SURR indicator

lights up on the display.

 

How does “AUTO SURROUND” work?

•

If a multi-channel signal comes in, an appropriate Surround

 

mode will be selected automatically.

•

If a Dolby Digital 2-channel with surround signal comes in,

 

“PLII MOVIE” will be selected.

•

If a Dolby Digital 2-channel without surround signal comes in,

 

“SURROUND OFF (stereo)” will be selected.

• If a Linear PCM signal comes in, “SURROUND OFF (stereo)”

 

will be selected.

 

 

NOTE

“AUTO SURROUND” does not take effect in the following cases:

–While playing an analog source,

–While selecting one of the fixed digital decode mode—“DOLBY DIGITAL” or “DTS” (see page 13).

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents For Customer Use RX-D201S / RX-D202BFor the main unit For Canada/pour Le CanadaFor Canada/pour le Canada For U.S.ATable of Contents Remote control When operating a DVD player, set the mode selector 1 to DVDParts identification Display window Rear panelFront panel Putting batteries in the remote control Before InstallationChecking the supplied accessories Getting startedFM antenna connection Connecting the FM and AM antennasFM antenna supplied AntennaSpeaker Layout Diagram Connecting the speakersConnecting the speakers Connecting the powered subwooferTurn off all components before making connections Connecting video componentsWhite Only for DVD recorder To S-video inputGreen Component video cable not supplied Blue Red Not supplied White Composite videoVideo cable not supplied Composite video cable not supplied Connecting a DBS tuner Green Connecting a TVBlue Red Connect the unit to the PC using a USB cable not supplied How to install the USB driversUSB Connection Digital connectionUSB drivers are installed automatically Connecting the power cordCheck if the drivers are correctly installed Now PC is ready for playback through the USB connectionSelecting the analog or digital input mode Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeInitial setting Dgtl Auto Ex. When Dolby Digital is selectedBasic adjustment of auto memory Turning off the power with the Sleep TimerSignal and speaker indicators on the display Turning off the sounds temporarilyPress Setting Basic settingsPress SET Before you start, rememberBasic setting items Speakers channels number and the sizeRoom size and the speaker distance/output level Setting subwoofer information-SUBWOOFER Setting the speakersSetting the surround back speakers-S Back OUT Turn Multi JOG to select the appropriate SettingSetting the speaker distance Activating the EX/ES/PLIIx setting- EX/ES/PLIIxFrom the remote control AutoSetting bass sound Using the Midnight modeSelecting the main or sub channel VCR S/C DVD S/CSound adjustments Basic adjustment itemsOperating procedure Press Test again to stop the test tone Press SoundAttenuating the input signal-INPUT ATT Adjusting the bass soundsAdjusting the virtual room size for DSP modes Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone Using preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modeReproducing theater ambience Creating realistic sound fieldsIntroducing the Surround modes Dolby Digital3D Headphone mode About other digital signalsDTS All Channel Stereo mode ALL CH Stereo Introducing the DSP modesDigital Acoustic Processor DAP modes DTSDolby Digital Incoming Signal Type Using the Surround/DSP modesAbout the DSP modes Virtual Surround BackSelecting the Surround/DSP modes When you select Auto SurroundConnections 1 AV Compu Link connection AV Compu Link remote control systemConnections 2 Video cable connection Monaural mini-plugs not suppliedAutomatic selection of TV’s input mode Connecting procedureAutomatic power on/off One-touch video playOperating other JVC products Changing the remote control code for DVD recorder DVD recorder or DVD playerRelease STANDBY/ON DVR/DVD Operating other manufacturers’ products Changing the transmittable signals for operating a TVRelease STANDBY/ON TV/DBS/CATV Manufacturers’ codes for TVRelease STANDBY/ON VCR Changing the transmittable signals for operating a VCRTry to operate your VCR by pressing Manufacturers’ codes for VCRManufacturers’ codes for Catv converter/ DBS tuner Try to operate your DVD player by pressingManufacturers’ codes for DVD player Power TroubleshootingProblem Possible Cause Solution Remote control TunerAmplifier SpecificationsFM tuner IHF AM tunerPage Page Audio Video Control Receiver Page Page Page Page Page Page

RX-D202B, RX-D201S specifications

The JVC RX-D201S and RX-D202B are two high-performance stereo receivers that cater to the needs of audiophiles and casual listeners alike. These models are designed to deliver an immersive audio experience with a range of features and technologies that enhance sound quality and usability.

One of the standout features of the JVC RX-D201S and RX-D202B is their impressive power output. Both models deliver solid amplification, ensuring that even the most demanding speakers perform beautifully. The receivers offer a dynamic range that captures the nuances of your favorite music, whether you are listening to classical, rock, or electronic genres. With RMS power ratings that provide ample headroom, these receivers can fill a room with rich, detailed sound.

Connectivity is another key aspect of the RX-D201S and RX-D202B. The receivers come equipped with multiple input options, including HDMI, coaxial, optical digital inputs, and analog inputs, allowing users to connect a wide variety of audio and video devices, from Blu-ray players to gaming consoles. The inclusion of Bluetooth technology is a major advantage, enabling wireless streaming from smartphones and tablets. This feature provides added convenience for users who prefer to listen to music without the hassle of wired connections.

The receivers boast a user-friendly interface, making it easy for individuals of all technical backgrounds to navigate through settings and sources. The backlit remote control enhances usability, allowing users to manage their audio experience from across the room.

In terms of audio performance, both models are equipped with advanced sound processing technologies. They support various sound modes, allowing users to tailor the listening experience to their personal preferences. Features such as tone control and equalizer settings further enhance the versatility of the sound output.

The design of the JVC RX-D201S and RX-D202B is sleek and modern, with a minimalist aesthetic that fits well in any home entertainment setup. The built-in cooling system ensures consistent performance even during extended listening sessions, safeguarding the longevity of the unit.

In summary, the JVC RX-D201S and RX-D202B are superb choices for anyone seeking powerful, flexible, and user-friendly stereo receivers. With their robust features, impressive connectivity, and excellent audio quality, they stand out as reliable options in the competitive audio market. Users will find that these receivers excel in delivering a sophisticated listening experience that meets diverse musical tastes and preferences.
Top Page Image Contents