JVC RX-D202B, RX-D201S manual Connecting the power cord, USB drivers are installed automatically

Page 13

5.The USB drivers are installed automatically.

•If the USB drivers are not installed automatically, install the USB drivers by following the instructions on the PC’s monitor.

6.Check if the drivers are correctly installed.

1. Open the Control Panel on your PC: Select [Start] = [Control Panel].

2. Select [System] = [Hardware] = [Device Manager] =

[Sound, video and game controllers] = [Universal Serial Bus controllers].

•The following window appears, and you can check whether the drivers are installed.

Now PC is ready for playback through the USB connection.

After installation is completed, you can use your PC as the playback source. The PC automatically recognizes the receiver whenever a USB cable is connected between the PC and the receiver while the receiver is turned on.

•When not using the PC as the playback source, disconnect the USB cable.

To play back sounds on the PC, refer to the manuals supplied with the sound reproduction application installed in the PC.

NOTES

•DO NOT turn off the receiver or disconnect the USB cable while installing the drivers and for several seconds while your PC is recognizing the receiver.

•Use a full speed USB cable (version 1.1). Recommended cord length is 1.5 m.

•If your PC does not recognize the receiver, disconnect the USB cable and connect it again. If it does not work yet, restart Windows.

•The installed drivers can be recognized only when the USB cable is connected between the receiver and your PC.

•The sound may not be played back correctly—interrupted or degraded—due to your PC settings and PC specifications.

*Microsoft®, Windows® 98 SE, Windows® Me, Windows® 2000, and Windows® XP are registered trademarks of Microsoft corporation.

Connecting the power cord

When all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted firmly. The standby lamp lights in red.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents.

•If the cord is damaged, consult a dealer and have the power cord replaced with a new one.

NOTES

•Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.

•The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:

–When you unplug the power cord.

–When a power failure occurs.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents For Customer Use RX-D201S / RX-D202BFor the main unit For Canada/pour Le CanadaFor Canada/pour le Canada For U.S.ATable of Contents When operating a DVD player, set the mode selector 1 to DVD Remote controlParts identification Rear panel Display windowFront panel Putting batteries in the remote control Before InstallationChecking the supplied accessories Getting startedFM antenna connection Connecting the FM and AM antennasFM antenna supplied AntennaSpeaker Layout Diagram Connecting the speakersConnecting the speakers Connecting the powered subwooferTurn off all components before making connections Connecting video componentsWhite Only for DVD recorder To S-video inputNot supplied White Composite video Green Component video cable not supplied Blue RedVideo cable not supplied Composite video cable not supplied Connecting a TV Connecting a DBS tuner GreenBlue Red Connect the unit to the PC using a USB cable not supplied How to install the USB driversUSB Connection Digital connectionUSB drivers are installed automatically Connecting the power cordCheck if the drivers are correctly installed Now PC is ready for playback through the USB connectionSelecting the analog or digital input mode Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeInitial setting Dgtl Auto Ex. When Dolby Digital is selectedBasic adjustment of auto memory Turning off the power with the Sleep TimerSignal and speaker indicators on the display Turning off the sounds temporarilyPress Setting Basic settingsPress SET Before you start, rememberSpeakers channels number and the size Basic setting itemsRoom size and the speaker distance/output level Setting subwoofer information-SUBWOOFER Setting the speakersSetting the surround back speakers-S Back OUT Turn Multi JOG to select the appropriate SettingSetting the speaker distance Activating the EX/ES/PLIIx setting- EX/ES/PLIIxFrom the remote control AutoUsing the Midnight mode Setting bass soundSelecting the main or sub channel VCR S/C DVD S/CBasic adjustment items Sound adjustmentsOperating procedure Press Test again to stop the test tone Press SoundAttenuating the input signal-INPUT ATT Adjusting the bass soundsAdjusting the virtual room size for DSP modes Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone Using preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modeReproducing theater ambience Creating realistic sound fieldsIntroducing the Surround modes Dolby DigitalAbout other digital signals 3D Headphone modeDTS Introducing the DSP modes All Channel Stereo mode ALL CH StereoDigital Acoustic Processor DAP modes DTSDolby Digital Incoming Signal Type Using the Surround/DSP modesAbout the DSP modes Virtual Surround BackSelecting the Surround/DSP modes When you select Auto SurroundConnections 1 AV Compu Link connection AV Compu Link remote control systemConnections 2 Video cable connection Monaural mini-plugs not suppliedAutomatic selection of TV’s input mode Connecting procedureAutomatic power on/off One-touch video playOperating other JVC products DVD recorder or DVD player Changing the remote control code for DVD recorderRelease STANDBY/ON DVR/DVD Operating other manufacturers’ products Changing the transmittable signals for operating a TVRelease STANDBY/ON TV/DBS/CATV Manufacturers’ codes for TVRelease STANDBY/ON VCR Changing the transmittable signals for operating a VCRTry to operate your VCR by pressing Manufacturers’ codes for VCRTry to operate your DVD player by pressing Manufacturers’ codes for Catv converter/ DBS tunerManufacturers’ codes for DVD player Power TroubleshootingProblem Possible Cause Solution Remote control TunerAmplifier SpecificationsFM tuner IHF AM tunerPage Page Audio Video Control Receiver Page Page Page Page Page Page

RX-D202B, RX-D201S specifications

The JVC RX-D201S and RX-D202B are two high-performance stereo receivers that cater to the needs of audiophiles and casual listeners alike. These models are designed to deliver an immersive audio experience with a range of features and technologies that enhance sound quality and usability.

One of the standout features of the JVC RX-D201S and RX-D202B is their impressive power output. Both models deliver solid amplification, ensuring that even the most demanding speakers perform beautifully. The receivers offer a dynamic range that captures the nuances of your favorite music, whether you are listening to classical, rock, or electronic genres. With RMS power ratings that provide ample headroom, these receivers can fill a room with rich, detailed sound.

Connectivity is another key aspect of the RX-D201S and RX-D202B. The receivers come equipped with multiple input options, including HDMI, coaxial, optical digital inputs, and analog inputs, allowing users to connect a wide variety of audio and video devices, from Blu-ray players to gaming consoles. The inclusion of Bluetooth technology is a major advantage, enabling wireless streaming from smartphones and tablets. This feature provides added convenience for users who prefer to listen to music without the hassle of wired connections.

The receivers boast a user-friendly interface, making it easy for individuals of all technical backgrounds to navigate through settings and sources. The backlit remote control enhances usability, allowing users to manage their audio experience from across the room.

In terms of audio performance, both models are equipped with advanced sound processing technologies. They support various sound modes, allowing users to tailor the listening experience to their personal preferences. Features such as tone control and equalizer settings further enhance the versatility of the sound output.

The design of the JVC RX-D201S and RX-D202B is sleek and modern, with a minimalist aesthetic that fits well in any home entertainment setup. The built-in cooling system ensures consistent performance even during extended listening sessions, safeguarding the longevity of the unit.

In summary, the JVC RX-D201S and RX-D202B are superb choices for anyone seeking powerful, flexible, and user-friendly stereo receivers. With their robust features, impressive connectivity, and excellent audio quality, they stand out as reliable options in the competitive audio market. Users will find that these receivers excel in delivering a sophisticated listening experience that meets diverse musical tastes and preferences.
Top Page Image Contents