Installation and Reference for the BayStack 21 PCI 10/100 Adapter w/WOL
14.Use the Gateway or DNS Configuration tabs to configure other parameters, as needed.
15.Click OK.
The Copying Files dialog box opens.
16.In the “Copy files from:” field, enter the location of the requested files or CD.
17.Click OK.
The system restart dialog box opens. Restarting your system is necessary to enable your PC to finish setting up your new hardware.
18.Remove all CDs from the CD drive.
19.Click Yes.
Your system restarts.
Installing the Network Driver in a Windows 98 Environment
This section describes the steps required to install the BayStack 21 network driver in a Windows 98 workstation.
To install the network driver:
1.Turn on the power to the workstation, and start Windows 98.
The New Hardware Found window opens, identifying a generic network card. For instance, the window may list “PCI Ethernet Controller” ( Figure
New Hardware Found
PCI Ethernet Controller
Select which driver you want to install for your new hardware: | 9562DA |
|
|
Figure 3-13. New Hardware Found Window—Generic
|
