Software Installation
To set specific driver parameters:
1.From the Board B21LAN10_ 1 (Driver B21LAN10) Actions menu, select “Select/Modify driver parameters and protocols.”
2.Press Enter.
The default protocol is IPX. You can also select TCP/IP or AppleTalk.
3.Select a protocol from the available options.
4.Specify the slot number (slot #).
5.Select “Save parameter and load select driver.”
If you select the IPX protocol, the network number (network #) is randomly generated.
6.Press Enter at each of the following four prompts:
•802.3
•802.2
•SNAP
•Ethernet II
