TCP/IP Properties Dialog Box | Nortel Networks W/WOL, 21 PCI 10/100

Software Installation

4.Click Properties.

The TCP/IP Properties dialog box opens (Figure 3-20).

Figure 3-20. TCP/IP Properties Dialog Box

5.Select the IP Address tab.

6.If the workstation has a static IP address, specify the IP address, subnet mask, and default gateway of your workstation.

You can also choose the “Obtain an IP address automatically” option if the workstation does not have a static IP address. If you choose this option, your IP address will be supplied by a DHCP server.

7.Use the Gateway or DNS Configuration tabs to configure other parameters, as needed.

8.Click OK.

The System Settings Change dialog box opens.

206379-A

3-17

Image 47

Nortel Networks W/WOL, 21 PCI 10/100 manual TCP/IP Properties Dialog Box

Contents

Part No -A September Great America Parkway Santa Clara, CA EN 55 022 Statement Copyright 1999 Nortel NetworksTrademarks USA Requirements Only Voluntary Control Council for Interference Vcci Statement 206379-A Restricted Rights Legend Nortel Networks NA Inc. Software License Agreement Vii Viii Contents Chapter Using the WOL Feature Appendix B Novell NetWare Reference Information Xii Figures 26. Microsoft TCP/IP Properties Dialog Box Tables Xvi Text Conventions PrefaceBefore You Begin Technical Solutions Center Telephone Number Technical Publications How to Get Help BayStack 21 PCI 10/100 Adapter w/WOL Overview Chapter Introduction BayStack 21 Network Card Product FeaturesProduct Description LEDs RJ-45 Ethernet Port Describes the Link and Activity LED indications WOL Cable and Connector System Requirements WOL Connector Supported Operating Systems Operating Environments Ethernet Cables 10 Mb/s Cable RequirementsFast Ethernet Cables 100 Mb/s Page Package Contents Chapter Hardware Installation Installing the BayStack 21 PCI 10/100 Adapter w/WOL Connecting the WOL Cable Page Chapter Software Installation Turn on the power to the workstation, and start Windows PreinstallationInstalling the Network Driver in a Windows 95 Environment New Hardware Found Window-BayStack Network Card Click Next Update Device Driver Wizard Remove any CDs from your CD drive Click Yes Click Finish Select the Identification tab Figure Configuring the Windows 95 EnvironmentConfiguring the Workstation Identification Enter the following information for your workstation System Settings Change Dialog Box Network Dialog Box-Configuration Tab Configuring the Network Properties Select Protocol Click Add Click Add 11. Configuration Tab, BayStack 21 Network Card Selected 12. TCP/IP Properties Dialog Box Click Properties Remove all CDs from the CD drive Click Yes Installing the Network Driver in a Windows 98 Environment 14. New Hardware Found Window 16. Copying Files Dialog Box Select one of the following options 18. System Settings Change Dialog Box Select Nortel BayStack 21 10/100 PCI Ethernet Adapter Configuring the Windows 98 Environment 20. TCP/IP Properties Dialog Box Select the Adapters tab Figure Installing the Network Driver in a Windows NT Environment Click Have Disk Select Add 23. Select OEM Option Dialog Box Select Auto Click OK Click the Protocols tab Configuring the Network Properties Microsoft TCP/IP Properties dialog box opens Figure Type Installing the Network Driver in a Novell NetWare ServerFrom the Installation Options menu, select Driver options Click Close Specifying Driver Parameters Press Enter Press Enter at each of the following four prompts Enter the following commands, in order Installing the Network Card in a Novell NetWare Client Setting Up the Workstation Chapter Using the WOL Feature Open a WOL utility, such as the Magic Packet Utility Figure Running the WOL Feature Magic Packet Utility identification window opens Figure Send a Magic Packet to One Host dialog box opens Figure Diagnostic LEDs Chapter Troubleshooting Software Issues Hardware Issues Typical PCI Slot Parameters Page Product Specifications Appendix a Technical Specifications Software Drivers Table A-1. Technical Specifications Novell NetWare Server AUTOEXEC.NCF Files and Parameters Appendix B Novell NetWare Reference Information One Network Card Installed Slot Parameter Sample AUTOEXEC.NCF File Parameters Node Parameter Sample NET.CFG Files Novell NetWare Client Commands and NET.CFG FileClient Commands Page Numbers Index Index-2