Nortel Networks 21 PCI 10/100, W/WOL instruction

Installation and Reference for the BayStack 21 PCI 10/100 Adapter w/WOL

Configuring the Windows 95 Environment

You must configure the Windows 95 environment on your workstation after you install the BayStack 21 network driver. Configure your workstation identification first, and then configure TCP/IP properties.

Configuring the Workstation Identification

To configure the workstation identification:

1.From the Windows taskbar, choose Start > Settings > Control Panel.

2.Double-click Network.

The Network dialog box opens.The configuration tab is displayed by default.

3.Select the Identification tab (Figure 3-6).

Figure 3-6. Network Dialog Box—Identification Tab

3-6

206379-A

Image 36

Nortel Networks 21 PCI 10/100, W/WOL Configuring the Windows 95 Environment, Configuring the Workstation Identification

Contents

Part No -A September Great America Parkway Santa Clara, CA Copyright 1999 Nortel Networks TrademarksUSA Requirements Only EN 55 022 Statement Voluntary Control Council for Interference Vcci Statement 206379-A Restricted Rights Legend Nortel Networks NA Inc. Software License Agreement Vii Viii Contents Chapter Using the WOL Feature Appendix B Novell NetWare Reference Information Xii Figures 26. Microsoft TCP/IP Properties Dialog Box Tables Xvi Preface Before You BeginText Conventions Technical Publications How to Get Help Technical Solutions Center Telephone Number Chapter Introduction BayStack 21 PCI 10/100 Adapter w/WOL Overview Product Features Product DescriptionBayStack 21 Network Card RJ-45 Ethernet Port LEDs WOL Cable and Connector Describes the Link and Activity LED indications WOL Connector System Requirements Operating Environments Supported Operating Systems Cable Requirements Fast Ethernet Cables 100 Mb/sEthernet Cables 10 Mb/s Page Chapter Hardware Installation Package Contents Installing the BayStack 21 PCI 10/100 Adapter w/WOL Connecting the WOL Cable Page Chapter Software Installation Preinstallation Installing the Network Driver in a Windows 95 EnvironmentTurn on the power to the workstation, and start Windows New Hardware Found Window-BayStack Network Card Update Device Driver Wizard Click Next Click Finish Remove any CDs from your CD drive Click Yes Configuring the Windows 95 Environment Configuring the Workstation IdentificationSelect the Identification tab Figure System Settings Change Dialog Box Enter the following information for your workstation Configuring the Network Properties Network Dialog Box-Configuration Tab Click Add Select Protocol Click Add 11. Configuration Tab, BayStack 21 Network Card Selected Click Properties 12. TCP/IP Properties Dialog Box Installing the Network Driver in a Windows 98 Environment Remove all CDs from the CD drive Click Yes 14. New Hardware Found Window 16. Copying Files Dialog Box 18. System Settings Change Dialog Box Select one of the following options Configuring the Windows 98 Environment Select Nortel BayStack 21 10/100 PCI Ethernet Adapter 20. TCP/IP Properties Dialog Box Installing the Network Driver in a Windows NT Environment Select the Adapters tab Figure Select Add Click Have Disk Select Auto Click OK 23. Select OEM Option Dialog Box Configuring the Network Properties Click the Protocols tab Microsoft TCP/IP Properties dialog box opens Figure Installing the Network Driver in a Novell NetWare Server From the Installation Options menu, select Driver optionsClick Close Type Press Enter Specifying Driver Parameters Press Enter at each of the following four prompts Installing the Network Card in a Novell NetWare Client Enter the following commands, in order Chapter Using the WOL Feature Setting Up the Workstation Running the WOL Feature Open a WOL utility, such as the Magic Packet Utility Figure Magic Packet Utility identification window opens Figure Send a Magic Packet to One Host dialog box opens Figure Chapter Troubleshooting Diagnostic LEDs Hardware Issues Software Issues Typical PCI Slot Parameters Page Appendix a Technical Specifications Product Specifications Table A-1. Technical Specifications Software Drivers Appendix B Novell NetWare Reference Information Novell NetWare Server AUTOEXEC.NCF Files and Parameters One Network Card Installed Sample AUTOEXEC.NCF File Parameters Slot Parameter Node Parameter Novell NetWare Client Commands and NET.CFG File Client CommandsSample NET.CFG Files Page Index Numbers Index-2