JVC RX-D202B, RX-D201S manual Adjust the volume, Listening with headphones, Dgtl Auto Digital Auto

Page 15

DGTL AUTO (DIGITAL AUTO):

Select for the digital input mode. The receiver automatically detects the incoming signal format, then the digital signal format indicator (LINEAR PCM,

, , or 96/24) for the detected signal lights up.

DOLBY DIGITAL*: Select to play back software encoded with Dolby Digital.

DTS*:Select to play back software encoded with DTS.

ANALOG:Select for the analog input mode. The ANALOG indicator lights up on the display.

Initial setting: DGTL AUTO

*If the following symptoms occur while playing Dolby Digital or DTS software with “DGTL AUTO” selected, select “DOLBY DIGITAL” or “DTS.”

Sound does not come out at the beginning of playback.

Noise comes out while searching for or skipping chapters or tracks.

Ex.: When Dolby Digital is selected

AUTO SURR

DIGITAL AUTO L C R

3 Adjust the volume

To increase the volume, turn MASTER VOLUME control clockwise (or press VOLUME + on the remote control).

To decrease the volume, turn MASTER VOLUME control counterclockwise (or press VOLUME – on the remote control).

When you adjust the volume, the volume level indication appears on the display for a while.

ANALOG

AUTO SURR

LR

S.WFR

CAUTION:

Always set the volume to the minimum before starting any sources. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

NOTE

The volume level can be adjusted within the range of “0” (minimum) to “50” (maximum).

DIGITAL

S.WFR LFE

LS RS

NOTES

You cannot select the digital input mode when selecting “FM” or “AM” as the source.

The input mode is fixed to “DGTL AUTO” when selecting “USB DIGITAL” as the source.

When you turn off the power or select another source, “DOLBY DIGITAL” or “DTS” is canceled and the digital mode is automatically reset to “DGTL AUTO.”

The following digital signal format indicators on the display indicate what type of signal comes into the receiver.

LINEAR PCM: Lights up when Linear PCM signal comes in.

: • Lights up when Dolby Digital signal comes in.

Flashes when “DOLBY DIGITAL” is selected for any software other than Dolby Digital.

:• Lights up when conventional DTS signal comes in.

Flashes when “DTS” is selected for any software other than DTS.

96/24: Lights up when DTS 96/24 signal comes in.

NOTE

When “DGTL AUTO” cannot recognize the incoming signal, no digital signal format indicator lights up on the display.

Listening with headphones

You can enjoy not only stereo software but also multi-channel software through the headphones. (Sounds are down-mixed to the front channels while playing multi-channel software.)

Connect a pair of headphones to the PHONES jack on the front panel to activate the HEADPHONE mode.

The HEADPHONE indicator lights up on the display.

You can also enjoy the Surround/DSP mode through the headphones—3D HEADPHONE mode. For details, see page 28.

Disconnecting a pair of headphones from the PHONES jack cancels the HEADPHONE (or 3D HEADPHONE) mode and activates the speakers.

CAUTION:

Be sure to turn down the volume:

Before connecting or putting on headphones, as high volume can damage both the headphones and your hearing.

Before removing headphones, as high volume may output from the speakers.

13

Image 15
Contents For Customer Use RX-D201S / RX-D202BFor U.S.A For Canada/pour Le CanadaFor the main unit For Canada/pour le CanadaTable of Contents Remote control When operating a DVD player, set the mode selector 1 to DVDParts identification Display window Rear panelFront panel Getting started Before InstallationPutting batteries in the remote control Checking the supplied accessoriesAntenna Connecting the FM and AM antennasFM antenna connection FM antenna suppliedConnecting the powered subwoofer Connecting the speakersSpeaker Layout Diagram Connecting the speakersOnly for DVD recorder To S-video input Connecting video componentsTurn off all components before making connections WhiteGreen Component video cable not supplied Blue Red Not supplied White Composite videoVideo cable not supplied Composite video cable not supplied Connecting a DBS tuner Green Connecting a TVBlue Red Digital connection How to install the USB driversConnect the unit to the PC using a USB cable not supplied USB ConnectionNow PC is ready for playback through the USB connection Connecting the power cordUSB drivers are installed automatically Check if the drivers are correctly installedBasic operations Turn on the powerSelecting the analog or digital input mode To turn off the power into standbyEx. When Dolby Digital is selected Adjust the volumeListening with headphones Initial setting Dgtl AutoTurning off the sounds temporarily Turning off the power with the Sleep TimerBasic adjustment of auto memory Signal and speaker indicators on the displayBefore you start, remember Basic settingsPress Setting Press SETBasic setting items Speakers channels number and the sizeRoom size and the speaker distance/output level Turn Multi JOG to select the appropriate Setting Setting the speakersSetting subwoofer information-SUBWOOFER Setting the surround back speakers-S Back OUTAuto Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance From the remote controlSetting bass sound Using the Midnight modeSelecting the main or sub channel VCR S/C DVD S/CSound adjustments Basic adjustment itemsOperating procedure Press Test again to stop the test tone Press SoundAdjusting the liveness effect for DSP modes Adjusting the bass soundsAttenuating the input signal-INPUT ATT Adjusting the virtual room size for DSP modesAdjusting the center tone-CENTER Tone Tuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsTo tune in a preset station Selecting the FM reception modeDolby Digital Creating realistic sound fieldsReproducing theater ambience Introducing the Surround modes3D Headphone mode About other digital signalsDTS All Channel Stereo mode ALL CH Stereo Introducing the DSP modesDigital Acoustic Processor DAP modes Virtual Surround Back Using the Surround/DSP modesDTSDolby Digital Incoming Signal Type About the DSP modesSelecting the Surround/DSP modes When you select Auto SurroundMonaural mini-plugs not supplied AV Compu Link remote control systemConnections 1 AV Compu Link connection Connections 2 Video cable connectionOne-touch video play Connecting procedureAutomatic selection of TV’s input mode Automatic power on/offOperating other JVC products Changing the remote control code for DVD recorder DVD recorder or DVD playerRelease STANDBY/ON DVR/DVD Manufacturers’ codes for TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Release STANDBY/ON TV/DBS/CATVManufacturers’ codes for VCR Changing the transmittable signals for operating a VCRRelease STANDBY/ON VCR Try to operate your VCR by pressingManufacturers’ codes for Catv converter/ DBS tuner Try to operate your DVD player by pressingManufacturers’ codes for DVD player Remote control Tuner TroubleshootingPower Problem Possible Cause SolutionAM tuner SpecificationsAmplifier FM tuner IHFPage Page Audio Video Control Receiver Page Page Page Page Page Page

RX-D202B, RX-D201S specifications

The JVC RX-D201S and RX-D202B are two high-performance stereo receivers that cater to the needs of audiophiles and casual listeners alike. These models are designed to deliver an immersive audio experience with a range of features and technologies that enhance sound quality and usability.

One of the standout features of the JVC RX-D201S and RX-D202B is their impressive power output. Both models deliver solid amplification, ensuring that even the most demanding speakers perform beautifully. The receivers offer a dynamic range that captures the nuances of your favorite music, whether you are listening to classical, rock, or electronic genres. With RMS power ratings that provide ample headroom, these receivers can fill a room with rich, detailed sound.

Connectivity is another key aspect of the RX-D201S and RX-D202B. The receivers come equipped with multiple input options, including HDMI, coaxial, optical digital inputs, and analog inputs, allowing users to connect a wide variety of audio and video devices, from Blu-ray players to gaming consoles. The inclusion of Bluetooth technology is a major advantage, enabling wireless streaming from smartphones and tablets. This feature provides added convenience for users who prefer to listen to music without the hassle of wired connections.

The receivers boast a user-friendly interface, making it easy for individuals of all technical backgrounds to navigate through settings and sources. The backlit remote control enhances usability, allowing users to manage their audio experience from across the room.

In terms of audio performance, both models are equipped with advanced sound processing technologies. They support various sound modes, allowing users to tailor the listening experience to their personal preferences. Features such as tone control and equalizer settings further enhance the versatility of the sound output.

The design of the JVC RX-D201S and RX-D202B is sleek and modern, with a minimalist aesthetic that fits well in any home entertainment setup. The built-in cooling system ensures consistent performance even during extended listening sessions, safeguarding the longevity of the unit.

In summary, the JVC RX-D201S and RX-D202B are superb choices for anyone seeking powerful, flexible, and user-friendly stereo receivers. With their robust features, impressive connectivity, and excellent audio quality, they stand out as reliable options in the competitive audio market. Users will find that these receivers excel in delivering a sophisticated listening experience that meets diverse musical tastes and preferences.