S3.25 Leg Press Option Assembly Instructions
3 AssemblyInstructions
Assembly of the Leg Press Option takes professional installers about 1 hour to complete. If this is the first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
CAUTION: Obtain assistance! Do not attempt to assemble the Leg Press Option by yourself. Because of the weight and size of the Leg Press Option, you could be injured or damage the equipment. Review the Installation Requirements on page 5 before proceeding.
The Leg Press Option comes in one box. It can be installed on either the S3.25 or S3.45 Precor Strength Training Equipment. Note that the location where you attach the Cross Brace to the Seat Frame differs.
As you read through the assembly instructions, be sure that you are using the correct mounting holes for your unit.
Be careful to assemble the components in the sequence presented in this guide.
Note: As with any assembled part, proper alignment and adjustment is critical. While tightening the fasteners, be sure to leave room for adjustments. Do not fully tighten the fasteners until instructed to do so.
1 | 2 | 3 | 4 | 5 | 6 |
Assembly Instructions
page 6