Precor S3.25 manual Remove the Shroud

S3.25 Leg Press Option Assembly Instructions

1. Remove the Shroud

Important: For ease of assembly, the fasteners and hardware for each step are labeled and packaged in separate bags.

Note: If you are assembling the Leg Press Option along with your S3.25, go directly to Step 2.

Before you can attach the Leg Press Option to the unit, you must remove the Shroud.

A.Remove the Shroud by loosening and removing six 2¾-inch bolts

six washers six locknuts

B.Pull the Shroud away from the S3.25 and lay it and its fasteners on the floor in a secure place.

Note: The top of the Shroud has a notch in it to help you clear the Top Beam fastener.

Top Beam

Notch in Shroud fits around Top Beam fastener

6 - 2¾" bolts A 6 - washers 6 - locknuts

B Remove Shroud

1

2

3

4

5

6

Step 1. Remove the Shroud

page 7