Perreaux SX60m manual 11Specifications

Page 23

11Specifications

11Specifications

Specifications in Brief

22

The correlation between published specifications and sonic quality can be unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the SX60m reveal excellent results by any standards. Tested at 115V and 230V after a 10 minute warm up period.

Rated Power Output	60WRMS into 8Ω
...........................................................................	75WRMS into 4Ω
Short Term Peak Power Output	255W into 8Ω
..............................................................................	350W into 4Ω
Voltage Swing	110.4Vp-p
Input Sensitivity:
Balanced	0.37VRMS
Unbalanced	0.27VRMS
Gain:
Balanced	35.6dB
Unbalanced	38.2dB
Input Impedance:	20kΩ
Balanced	20kΩ
Unbalanced	10kΩ
Total Harmonic.............................................Distortion (THD+N):	0.002%, @ 1kHz into 8Ω
Typically	0.002%, @ 1kHz into 8Ω
20Hz to 20kHz	<0.02%
Frequency Response:
20Hz–20kHz	+0dB, -0.05dB
5Hz–60kHz	+0dB, -0.25dB
Signal to Noise Ratio:
Rated Output (unweighted)	100dB
Dynamic Headroom (rated with music)	>2.0dB
Power Consumption:
Idle	10W
Maximum (at 75W into 4Ω)	85W
Audio Connections
Inputs	2 line level (RCA and XLR)
Outputs	2 line level (RCA and XLR)
.........................................................	1 pair speaker binding posts

Image 23

Contents SX60m 60W Mono-AuralPower AmplifierPage This page has intentionally been left blank Perreaux Silhouette Series Introducing theiiImportant Safety Instructions Table of Contents 1Unpacking and Placement Instant Install Insert the power cord supplied into the rear of the SX60m and into the wall. Switch on the socket at the wall and turn on the power of the SX60m by setting the power switch down Front Panel Functions Power LEDRear Panel Functions For more information on line input specifications, please refer to Chapter The serial number is unique to your SX60m. Please record this number and store it in a safe place. For any service related enquiry, please be prepared to quote the product serial number to Perreaux personnel or their service representative 5Special Design Philosophies John Pawson writes Special Design Features The SX60m features a 98VA toroidal mains transformer directly soldered to the PCB, Wima and Elna capacitors, highest quality Zobel network and customized internal heat sink solution. The PCB is double-sidedand constructed from the highest quality fibreglass base stock featuring 2oz copper Care and Maintenance Warranty Information S I L H O U E T T E S X 6 0 m Extended Warranty Registration Form3 Year Extended Warranty Form Troubleshooting Guide Check that the input and output RCA sockets and binding posts on the rear of the SX60m are free from corrosion 11Specifications IEC AC mains input receptacle Mains Input Voltage The Input Sensitivity figure indicates the input voltage required to achieve “rated” output 60WRMS into 8Ω Physical Dimensions Contact Details Installation Notes