10 | Troubleshooting Guide |
There is no output from my system
20
Please use this guide if you are experiencing any problems with the SX60m in your system. It will provide possible solutions for some given symptoms.
SX60m not turned on
Make sure the SX60m power switch is in the DOWN position.
AC cord not plugged in
Check that the AC cord is plugged into the IEC socket on the rear of the SX60m.
Mains power not turned on
Check if the power is turn on at the mains socket on the wall.
Interconnect cables not connected
Make sure that the input and output interconnect cables are plugged in and are connected to the respective RCA sockets on the rear of the SX60m.
Source not turned on
Check that your source component is plugged in to the mains and the power is turned on.
Source not set to play
Ensure that your source component is playing the recording you would like to listen to, and that pause is not pressed.
No volume setting
Make sure that the volume on your preamplifier is set to a suitable level.
SX60m set to incorrect input
Confirm that the input on your SX60m is connected to the appropriate preamplifiers output.
Loud speakers not connected
Check that your loud speakers are firmly connected via cables into the binding posts on the rear of the SX60m.