ENGLISH
11. TROUBLESHOOTING
If you think that something is wrong with your player, first check the points listed below. Incorrect operations can sometimes be taken for trouble and malfunctions. If the trouble persists even after the following points have been checked, consult your dealer or nearest Marantz sales office or service center.
Disc fails to turn.
•Has the power cord been connected properly?
•Has the player’s power been turned on?
•Has the disc been placed in the proper position?
•Is the disc upside down? (Is the disc’s label surface facing up?)
•Is the disc dirty?
•Is the disc scratched?
•Is the disc warped?
Disc turns but no sound is heard.
•Have the amplifier and speakers been connected properly?
•Has the amplifier’s power been turned on?
•Has the amplifier’s function or selector switch been set to “CD” or “AUX” (or to whichever connectors the player has been connected)?
•Is the amplifier’s volume at its lowest setting?
Disc starts turning but then stops at some point.
•Is the disc dirty?
•Is the disc scratched?
•Is the disc warped?
•Is the disc being played a music CD?
No remote control operations.
•Is the transmitter of the remote control unit (RC7300CD) pointed at the remote sensor of the player? Is there anything between the player and remote control unit which is blocking the signals?
•Have the batteries of the remote control unit (RC7300CD) run down?
•Is a strong light shining on the remote sensor of the player?
•Is the REMOTE CONTROL switch on the rear panel set to the EXTERNAL position? (Set it to the INTERNAL position if the player is to be used on its own.)
CD-R/CD-RW discs cannot be played.
•Has the disc been placed upside down on the disc tray?
•Is the recorded information in a format
46
