ENGLISH
NAMES AND FUNCTIONS
This is used to set start point (A) and end point (B) when a particular section is to be played repeatedly.
CANCEL button
This is used to cancel the programmed tracks.
TIME button
This switches the main display from the text display to the time display. It can also switch the time display during play.
It can display how much time has elapsed and how much play time remains for the current track as well as how much time has elapsed and how much play time remains for the whole disc.
During MP3 file play, it displays the elapsed time only.
SCROLL/RECALL button
This is used to scroll the text display when text is displayed. When it is pressed during program play, it is possible to check which tracks have been programmed.
ENTER button
This is used to enter the play function settings.
Q.REPLAY (quick replay) button
This is used to search backward from the current play position for the time equivalent to the setting and resume play.
Furthermore, operation is performed as the end monitor using one of the play setting functions. In the case of the end monitor, play is resumed from the position, which is a number of seconds that has been set, before the end position of the track now playing.
Rear panel
BALANCED |
|
|
|
|
|
|
R | L |
|
|
|
|
|
OUTPUT LEVEL |
| CONTROL I/O | RS232C |
|
| |
|
|
|
|
|
| |
L |
|
| IN |
|
|
|
|
|
|
|
| DIGITAL OUT | |
|
|
|
|
| (SPDIF) | |
R |
|
| OUT |
| CONNECTION | |
|
|
|
|
| 1 | GND |
|
|
| EXTERNAL | INTERNAL | 3 | HOT (+) |
| COAX. | OPT. | 2 1 2 | |||
ANALOG OUT | DIGITAL OUT | REMOTE CONTROL | 3 | COLD | ||
ANALOG OUT (analog output) connectors
The music signals during play are output from these connectors.
DIGITAL OUT COAX. (digital coaxial output) connector
The music signals during play are output digitally from this coaxial output connector.
*Digital signals are not output during MP3 file play or pitch control play.
DIGITAL OUT OPT. (digital optical output) connector
The music signals during play are output digitally from this optical output connector.
*Digital signals are not output during MP3 file play or pitch control play.
REMOTE CONTROL IN and OUT connectors
Using the remote control connecting cable, these connectors enable this player to be connected to a Marantz component equipped with remote control connectors. These connections make it possible to control an entire system that centers on the amplifier or other such component.
EXTERNAL/INTERNAL switch
Before the player was shipped from the factory, this switch was set to INTERNAL to enable the remote sensor built into the player to be used.
Before using the connecting cable to make the connection between the player and the remote control connectors on a Marantz equipment, set the switch to EXTERNAL.
Note:
*Signals cannot be received from the remote control unit if the switch is kept at EXTERNAL when the player is to be used on its own.
12
