Perreaux SX60m manual 1Unpacking and Placement

Page 7
1Unpacking and Placement

1Unpacking and Placement

Unpacking Procedure

Note:

Box

Contents

Placing Your SX60m

Ventilation Requirements

Note:

6

The SX60m is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed.

Pull the foam protecting end-caps off either side of the unit and remove the black material covering.

The SX60m Mono-Aural power amplifier is now unpacked and ready for further installation.

Please retain all packaging material for future transport.

1 x SX60m Mono-Aural power amplifier

1 x Product manual

3 x Performance analysis charts

1 x Detachable AC power cord

The SX60m should generally be placed close to your source equipment, thus keeping interconnect cabling between the SX60m and associated components as short as practical. This will reduce the systems susceptibility to radio frequency interference and the negative effects associated with long cables.

The SX60m is a convection cooled amplifier. For optimal performance, the unit MUST receive adequate ventilation.

àPlease do not cover the product with a cloth or similar.

àPlease do not mount the SX60m directly onto carpeted surfaces.

In the event that the SX60m is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 12).

Please take all necessary steps to ensure that the unit receives adequate ventilation

Page 6 Page 8
Image 7
Page 6 Page 8
Contents SX60m 60W Mono-AuralPower AmplifierPage This page has intentionally been left blank Perreaux Silhouette Series Introducing theiiImportant Safety Instructions Table of Contents 1Unpacking and Placement Instant Install Insert the power cord supplied into the rear of the SX60m and into the wall. Switch on the socket at the wall and turn on the power of the SX60m by setting the power switch down Front Panel Functions Power LEDRear Panel Functions For more information on line input specifications, please refer to Chapter The serial number is unique to your SX60m. Please record this number and store it in a safe place. For any service related enquiry, please be prepared to quote the product serial number to Perreaux personnel or their service representative 5Special Design Philosophies John Pawson writes Special Design Features The SX60m features a 98VA toroidal mains transformer directly soldered to the PCB, Wima and Elna capacitors, highest quality Zobel network and customized internal heat sink solution. The PCB is double-sidedand constructed from the highest quality fibreglass base stock featuring 2oz copper Care and Maintenance Warranty Information 3 Year Extended Warranty Form Extended Warranty Registration FormS I L H O U E T T E S X 6 0 m Troubleshooting Guide Check that the input and output RCA sockets and binding posts on the rear of the SX60m are free from corrosion 11Specifications IEC AC mains input receptacle Mains Input Voltage The Input Sensitivity figure indicates the input voltage required to achieve “rated” output 60WRMS into 8Ω Physical Dimensions Contact Details Installation Notes
Top Page Image Contents