9.Attach the Handrails (77, 78) to the Uprights (81, 83) with four 5/16" x 2 1/2" Patch Bolts (5) and four 5/16" Star Washers (11).
10.Have a second person hold the console assem- bly near the Right Handrail (78). Connect the Wire Harness (84) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN YOU TURN ON THE POWER. Next, remove the wire tie from the Wire Harness. Insert the connectors and the excess wire into the Right Handrail.
Set the console assembly on the Right Handrail (78) and the Left Handrail (not shown). Be care- ful not to pinch the wires.
9 | 11 |
|
5 |
| |
|
| |
11 |
|
|
77 |
| 5 |
| 81 | 11 |
| 83 | |
| 78 | |
|
|
10 | Console |
|
|
|
| Assembly |
|
|
|
|
|
| Console |
|
| 78 | 84 | Wire | Console |
|
|
| Wire Tie | Wire |
|
|
|
| 84 |
10