ProForm PFTL98908.1 user manual Be careful not to pinch the wires in the Right Handrail

Page 11

11. Be careful not to pinch the wires in the Right	11
Handrail (78).	11
Attach the console assembly to the Right	Console Assembly
Handrail (78) with two #8 x 3/4" Screws (1), a
1/4" x 1 1/4" Bolt (4), and a 1/4" Star Washer
(10). Repeat this step on the left side of the	78
console assembly. Start all four Screws and	78
both Bolts before tightening any of them.
See step 7. Tighten the four 1/4" x 5/8" Bolts
(3).	1
	1	10
		10
		4
12. If necessary, press the Left Accessory Tray (96)	12
and the Right Accessory Tray (97) into the con-	12	96
sole assembly.		96
	Console	97
	Assembly	97
13. Carefully lower the Uprights (81, 83).	13	81
Tighten the two 3/8" x 1 1/2" Patch Bolts (6) and	13	81
the two 3/8" x 3 1/2" Patch Bolts (8).		8
Raise the Uprights (81, 83).		8
Raise the Uprights (81, 83).	83	6
	83
	6 8
	11

Image 11

Contents On the WEB QUESTIONS?Model No. PFTL98908.1 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Pulse sensors are not medical devices Important PrecautionsPage Before YOU Begin Assembly Overtighten the Nut the Wheels must turn Freely Make sure that the power cord is unpluggedDo not fully fold the Frame yet Not fully fold the Frame yet See the inset drawing. Tie the wire tie Pinch the Wire Harness 84. Partially tighten Bolts touch the Base do not fully tighten Patch Bolts yetDo not tighten the Bolts yet Touch the Base do not fully tighten the Patch Bolts yetPage Be careful not to pinch the wires in the Right Handrail Be careful not to pinch the wires. Reattach PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modePage Select one of the preset workouts. To select one HOW to USE a Preset WorkoutInsert an iFit card and select a workout HOW to USE AN Ifit WorkoutOptional Chest Pulse Sensor Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL98908.1Qty Exploded Drawing A-Model No. PFTL98908.1 R0809A Exploded Drawing B-Model No. PFTL98908.1 R0809A Exploded Drawing C-Model No. PFTL98908.1 R0809A Exploded Drawing D-Model No. PFTL98908.1 R0809A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty