7. Slide the Right Upright Sleeve (96) up against | 7 |
|
|
the console assembly. Attach the Right Upright |
|
| |
|
|
| |
Sleeve with two 3/4" Screws (4). |
|
|
|
Attach the Left Upright Sleeve (not shown) to |
|
|
|
the Left Upright (73) in the same way. | 73 |
|
|
|
|
| 4 |
|
|
| 96 |
|
| 4 | 74 |
|
|
| |
8. With the help of a second person, raise the | 8 |
|
|
front of the treadmill and insert the crossbar on |
|
| |
|
|
| |
the Base (83) into the cutout in the cardboard |
|
|
|
stand as shown. Have the second person |
|
|
|
hold the treadmill to prevent it from moving |
|
|
|
forward or backward. |
|
|
|
Firmly tighten the four Upright Bolts (72). With |
|
| 72 |
the help of a second person, lower the treadmill |
|
| |
|
|
| |
off the cardboard stand. |
|
|
|
|
| 83 |
|
| 72 |
| Cardboard |
|
|
| Stand |
9. Note the location of the 75 ohm terminal and the | 9 |
|
|
audio/video input jack on the treadmill. For the |
|
| |
|
|
| |
television to operate, the included Audio/Video |
|
| Audio/ |
Wire Harness (115) and your DVD player or VCR |
|
| Video |
must be connected to the audio/video input jack |
|
| Input |
on the treadmill, a personal audio/video player |
|
|
|
must be connected to the audio/video jack on the |
|
|
|
console, or a CATV cable must be connected to |
|
| 75 Ohm |
the 75 ohm terminal (see page 12). |
|
| |
|
|
| Terminal |
|
|
| 115 |
10.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 23). To protect the floor or car- pet from damage, place a mat under the treadmill.
10