ProForm PFTL73105.2 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench

and your own phillips screwdriver

(with

a shaft at least 6” long) and wire cutters

.

 

Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled.

Extension Leg Nut (67)–4

Star Washer (8)–8

1” Tek Screw (22)–4

Console Bolt (64)–4

Extension Leg Bolt (65)–4

1.Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (58) so the treadmill is more stable. Do not fully fold the treadmill until it is completely assembled.

Attach four Base Pads (82) (only two are shown) to the base of the Uprights (84) with four 1” Tek Screws (22).

Insert an Extension Leg (89) into the base of the Uprights (84) as shown. Hold two Extension Leg Nuts (67) in the bottom of the Extension Leg. Next, insert two Extension Leg Bolts (65) with Star Washers (8) into the top of the Extension Leg, and firmly tighten the Extension Leg Bolts into the Extension Leg Nuts.

With the help of a second person, carefully tip the tread- mill onto its other side. Attach the other Extension Leg (not shown) as described above.

1

 

 

 

 

84

65

 

 

8

82

82

 

 

89

 

 

 

 

22

 

 

67

58

 

 

6

Image 6
Contents QUESTIONS? Model No. PFTL73105.2 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Make sure that the power cord is unpluggedPage Page Wire Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeAvoid moving Measure your heart rate if desiredStand on Foot rails Turn on the fan if desiredHOW to USE a Personal Trainer Program Select one of the personal trainer programsFollow your progress with the matrix Display HOW to Create a Custom Program Select one of the custom programsHOW to USE a Custom Program Select one of the pulse programs HOW to USE a Pulse ProgramIf pulse program 9 is selected, a pulse symbol If pulse programFollow your progress with the matrix Display Information MODE/DEMO Mode Important If aOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0406A Qty DescriptionDescription Exploded DRAWING-Model No. PFTL73105.2 67 82 105 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT