ProForm PFTL58007.0 user manual Raise the Frame 56 to the position shown

Page 11

13.Raise the Frame (56) to the position shown.

Have a second person hold the Frame until this step is completed.

Orient the Storage Latch (53) so that the large barrel and the Latch Knob (54) are in the posi- tions shown. Attach the lower end of the Storage Latch to the bracket on the Base (83) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8).

Attach the upper end of the Storage Latch (53) to the bracket on the Frame (56) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Note: It may be nec- essary to move the Frame back and forth to align the Storage Latch with the bracket.

Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 20).

13

56

 

8

4

 

 

53

54

Large

 

Barrel

 

83

 

8

 

4

14.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 22 and 23).

If you purchase the optional chest pulse sensor (see page 18), follow the steps below to install the re- ceiver included with the chest pulse sensor.

1.Make sure that the power cord is unplugged. Remove the indicated #8 x 3/4" Screw (12) and the Access Door (87) from the Console Base (93).

2.Connect the wire on the receiver (A) to the indi- cated wire extending from the Console Base (93). Hold the receiver so the small cylinder is oriented as shown and is facing the Console Base. Attach the receiver to the plastic posts on the Access Door (87) with the two in- cluded small screws.

3.Make sure that no wires are pinched. Reattach the Access Door (87) with the #8 x 3/4" Screw (12). Discard the other wires in- cluded with the receiver.

 

93

Small

Wire

Screws

A

 

Small

 

Cylinder

 

 

87

 

12

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents On the WEB QUESTIONS?Please do not Contact Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Hardware may be included AssemblySee the inset drawing. Tie the long tie Make sure that the power cord is unpluggedDo not fully fold the Frame yet Nut the Wheel must turn freely. DiscardNot fully fold the Frame yet Make sure the Upright Wire 38 is notFully tighten the Bolts yet Star Washers 9. Firmly tighten the Bolts Firmly tighten the BoltsPull on the sleeve to make sure that it is locked into place Start all the Screws before tightening any of themRaise the Frame 56 to the position shown PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate if desired Select a classic workout HOW to USE a Classic WorkoutSelect a weight loss workout HOW to USE the Weight Loss CenterOptional Chest Pulse Sensor HOW to USE the Stereo Sound SystemConnector is fully plugged Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description R1007AQty Exploded Drawing A-Model No. PFTL58007.0 R1007A Exploded Drawing B-Model No. PFTL58007.0 R1007A Exploded Drawing C-Model No. PFTL58007.0 Exploded Drawing D-Model No. PFTL58007.0 R1007A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty

PFTL58007.0 specifications

The ProForm PFTL58007.0 is a versatile treadmill designed to cater to both novice and seasoned runners seeking an efficient and effective workout solution. This model stands out in the crowded fitness market, boasting a range of features and technologies that enhance the overall user experience.

One of the most notable aspects of the PFTL58007.0 is its powerful 2.5 CHP motor, which ensures a smooth and reliable performance across various workout intensities. This motor allows for speeds ranging from 0 to 10 mph, accommodating different fitness levels and preferences. Additionally, the treadmill features a 10% incline option, providing users with an added challenge to boost their cardiovascular workout and engage more muscle groups during their runs.

Another key feature of the ProForm PFTL58007.0 is its spacious running surface. With a generous 20” x 55” tread belt, users can enjoy a comfortable and safe running experience without feeling constrained. The cushioned running deck is designed to reduce impact on joints, making it an excellent choice for those with a history of injuries or for individuals looking to prevent them.

In terms of technology, the ProForm PFTL58007.0 integrates with iFit, a subscription-based fitness platform that offers a wide variety of interactive workouts led by personal trainers. This feature allows users to experience global workouts and studio sessions, providing an engaging and motivating environment to reach fitness goals. The treadmill also includes a 5” display that tracks essential stats such as speed, distance, time, and calories burned, giving users immediate feedback during their workout.

Convenience features abound in the ProForm PFTL58007.0, including built-in speakers, an audio jack for media devices, and quick-access controls for speed and incline. The space-saver design allows the treadmill to fold up easily, making it ideal for those with limited space.

Overall, the ProForm PFTL58007.0 is a well-rounded treadmill that combines performance, comfort, and advanced technology. With its robust motor, adjustable incline, spacious running surface, and iFit compatibility, it is an excellent choice for anyone looking to enhance their fitness journey from the comfort of home.
Top Page Image Contents