ProForm PFTL58007.0 user manual Troubleshooting, Problem The power turns off during use

Page 21

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 12). Use only a single-outlet surge suppres- sor that meets all of the specifications described on page 12. Important: The treadmill is not com- patible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c.Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

PROBLEM: The power turns off during use

c

Tripped

Reset

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key into the console.

d.If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 18 to turn off the demo mode.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. With the help of a second person, carefully tip the Uprights (74, 78) down.

There may be two #8 x 2" Screws (105) in the bot- tom of the Belly Pan (73). If there are, remove them. Note: A Phillips screwdriver with a shaft at least 5 in. (13 cm) long is required.

a

74

 

78

73

 

105

 

105

21

Image 21
Contents Please do not Contact QUESTIONS?Call TOLL-FREE On the WEBTable of Contents Important Precautions Page Before YOU Begin Hardware may be included AssemblyDo not fully fold the Frame yet Make sure that the power cord is unpluggedNut the Wheel must turn freely. Discard See the inset drawing. Tie the long tieMake sure the Upright Wire 38 is not Fully tighten the Bolts yetNot fully fold the Frame yet Star Washers 9. Firmly tighten the Bolts Firmly tighten the BoltsPull on the sleeve to make sure that it is locked into place Start all the Screws before tightening any of themRaise the Frame 56 to the position shown Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate if desired Select a classic workout HOW to USE a Classic WorkoutSelect a weight loss workout HOW to USE the Weight Loss CenterConnector is fully plugged HOW to USE the Stereo Sound SystemInformation Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Page Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description R1007AQty Exploded Drawing A-Model No. PFTL58007.0 R1007A Exploded Drawing B-Model No. PFTL58007.0 R1007A Exploded Drawing C-Model No. PFTL58007.0 Exploded Drawing D-Model No. PFTL58007.0 R1007A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

PFTL58007.0 specifications

The ProForm PFTL58007.0 is a versatile treadmill designed to cater to both novice and seasoned runners seeking an efficient and effective workout solution. This model stands out in the crowded fitness market, boasting a range of features and technologies that enhance the overall user experience.

One of the most notable aspects of the PFTL58007.0 is its powerful 2.5 CHP motor, which ensures a smooth and reliable performance across various workout intensities. This motor allows for speeds ranging from 0 to 10 mph, accommodating different fitness levels and preferences. Additionally, the treadmill features a 10% incline option, providing users with an added challenge to boost their cardiovascular workout and engage more muscle groups during their runs.

Another key feature of the ProForm PFTL58007.0 is its spacious running surface. With a generous 20” x 55” tread belt, users can enjoy a comfortable and safe running experience without feeling constrained. The cushioned running deck is designed to reduce impact on joints, making it an excellent choice for those with a history of injuries or for individuals looking to prevent them.

In terms of technology, the ProForm PFTL58007.0 integrates with iFit, a subscription-based fitness platform that offers a wide variety of interactive workouts led by personal trainers. This feature allows users to experience global workouts and studio sessions, providing an engaging and motivating environment to reach fitness goals. The treadmill also includes a 5” display that tracks essential stats such as speed, distance, time, and calories burned, giving users immediate feedback during their workout.

Convenience features abound in the ProForm PFTL58007.0, including built-in speakers, an audio jack for media devices, and quick-access controls for speed and incline. The space-saver design allows the treadmill to fold up easily, making it ideal for those with limited space.

Overall, the ProForm PFTL58007.0 is a well-rounded treadmill that combines performance, comfort, and advanced technology. With its robust motor, adjustable incline, spacious running surface, and iFit compatibility, it is an excellent choice for anyone looking to enhance their fitness journey from the comfort of home.