ProForm PFTL49020 user manual Side View

Page 6

3.With the help of a second person, raise the Right Upright (108) and the Left Upright (not shown) to the vertical po- sition. Feed the Wire Harness (42) through a Handrail Spacer (107). Set the Handrail Spacer on the Right Upright. Make sure that the Handrail Spacer is turned so that the angle of the ends matches the angle of the Right Upright as shown in the inset drawing.

Identify the Right Handrail (72), which has a large hole in the left side. Feed the Wire Harness (42) up into the bracket on the Right Handrail and out of the large hole in the left side. Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the large hole.

Insert the bracket on the Right Handrail (72) into the top of the Right Upright (108). Attach the Right Handrail with a 1” Bolt (63) and a Flat Washer (76). Do not tighten the Bolt yet.

Attach the Left Handrail (not shown) as described above. Note: There is not a wire harness on the left side.

4.Set the Crossbar (40) on the brackets on the Handrails (71, 72). Attach the Crossbar with two Crossbar Screws (39). Do not tighten the Crossbar Screws yet.

Attach the end of the ground wire to the small hole in the side of the Right Handrail (72) with a Silver Ground Screw (111).

5.Place the Console Base (47) on the Right Handrail (72) and the Left Handrail (not shown). Attach the Console Base with six 3/4” Screws (2) (only four Screws are shown). Do not overtighten the Screws.

Insert the Wire Harness (42) through the two indicated plastic ties on the Console Base (47). Next, touch the Right Handrail (72) to discharge any static. Plug the widest connector on the Wire Harness into the widest connector on the back of the Console (43). If the connec- tor does not fit easily, rotate it and then connect it. Plug the other connector on the Wire Harness into the other connector on the Console.

If you plan to use iFIT.com CD’s or videocassettes, or pro- grams from our Web site (see page 13), plug the Audio Cable (56) into the jack on the back of the Console (43).

3

42

 

 

 

 

Large

 

 

Hole

 

 

72

Bracket

 

 

 

 

107

 

 

63

Side View

76

 

 

 

 

108

 

108

 

107

 

 

4

 

 

71

Bracket

 

 

Ground

111

 

Wire

 

 

39

 

 

40

 

 

Bracket

39

 

72

 

 

5

47

 

 

 

 

42

 

 

Ties

 

2

43

 

 

 

 

56

2

72

 

 

 

6

Image 6
Contents QUESTIONS? Model No. PFTL49020 Serial NoCustomer HOT Line Table of Contents Important PrecautionsPage Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedSide View Ties Opening 109 Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console Console DrawingSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key fully into the consoleDistance/Laps Measure your heart rate, if desiredWhenkey. you are finished exercising, remove Insert the key into the console HOW to USE a Workout ProgramWhen the program ends, remove the key from the console Select one of the workout programsHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerRCA Y-adapter HOW to Connect Your VCRAdapter Audio Cable PressVCR. the Play button on your CD player orMeasure your heart rate if desired HOW to USE Programs Directly from OUR WEB Site When the program ends, remove the keyFollow the on-line instructions to start the program HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part Identification Chart Part LIST-Model No. PFTL49020 Key Qty DescriptionExploded